Leica Wild T1010, Allegro CX, Carlson SurvCE

Moderator: Carlson Support

Leica Wild T1010, Allegro CX, Carlson SurvCE

Postby cchazer » Thu Mar 04, 2010 2:29 am

I have an old Leica Wild T1010 Total Station, and I am trying to get it to work with my Allegro CX data collector, the total station gives me a "parity error" anyone use this setup before? what baud? parity?
Posts: 4
Joined: Thu Mar 04, 2010 2:24 am

Postby site admin » Wed Jun 23, 2010 3:13 pm

Hi There

For this instrument SurvCE defaults at 2400, EVEN, 8,1 .However this may not be true under your gun.
I would check the setting on the Instrument and confirm that they match your parameters under SurvCE
If you are not able to locate this option on your instrument , then refer to your Instrument Manual.
If thats not possible either, then you could try different Baud rate configurations until you find a match.
site admin
Site Admin
Posts: 332
Joined: Wed Nov 21, 2007 4:40 pm
Location: Maysville KY

Return to TS

Who is online

Users browsing this forum: No registered users