Carlson Software Forum

I recently bought a Jett with SurvCE installed to replace a Husky that
failed. I've tried using the null modem cable that I used with the husky
to connect to the JettCE machine, with no success. Does the Jett require a
9 pin null modem cable or a straight through 9 pin cable to connect to my
pc?


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##

Why not use the standard cable that comes with the Jett ?


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##

It does need a null -modem cable.
However, I've found that the default speed is too high. Set-up and use a
57600 baud PC connection

Paul



"patidwelljr" <patidwelljr@juno.com> wrote in message
news:ehirdq$viv$1@update.carlsonsw.com...

I recently bought a Jett with SurvCE installed to replace a Husky that
failed. I've tried using the null modem cable that I used with the husky
to connect to the JettCE machine, with no success. Does the Jett require a
9 pin null modem cable or a straight through 9 pin cable to connect to my
pc?


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##