Carlson Software Forum

Carlson Software Discussion Group

Skip to content

SurvCe 2.00 &n Topcon

Moderator: Carlson Support

Post a reply

SurvCe 2.00 &n Topcon

Postby Dave » Mon Jun 18, 2007 9:31 pm

The new version is not reading the Zenith angles correctly in the "Set
Collection" menu. In fact the raw file is giving me zenith angles with the
minutes being over 60'( see excerpt below). My horizontal angles and Slope
Distance is good. What is causing my Zenith angles to have more than 60
minutes?
We are using a Topcon GPT 2003.

Thanks


--Set Collection with Obs Order 123...321...
OC,OP102,N 19180.41500,E 21367.59500,EL421.733,--TRAV
LS,HI4.9200,HR4.9000
BK,OP102,BP101,BS53.3451,BC0.0000
LS,HI4.9200,HR4.9000
BD,OP102,FP101,AR0.0000,ZE86.1647,SD333.765000,--TRAV
LS,HI4.9200,HR5.0300
FD,OP102,FP103A,AR270.4419,ZE90.1556,SD371.560000,--TEST
FR,OP102,FP103A,AR90.4416,ZE269.8669,SD371.560000,--TEST
LS,HI4.9200,HR4.9000
BR,OP102,FP101,AR180.0000,ZE273.7408,SD333.760000,--TRAV
--Warning: Vertical Angles to foresight differ by 0°11'14".
LS,HI4.9200,HR4.9000
BD,OP102,FP101,AR0.0000,ZE86.2789,SD333.765000,--TRAV
LS,HI4.9200,HR5.0300
FD,OP102,FP103A,AR270.4417,ZE90.1528,SD371.560000,--TEST
FR,OP102,FP103A,AR90.4415,ZE269.8675,SD371.560000,--TEST
LS,HI4.9200,HR4.9000
BR,OP102,FP101,AR179.5958,ZE273.7417,SD333.765000,--TRAV
--Warning: Vertical Angles to foresight differ by 0°11'47".
--SS,OP102,FP101,AR0.0000,ZE86.0413,SD333.763750,--TRAV
--LS,HI4.920000,HR5.030000
--SS,OP102,FP103A,AR270.4417,ZE89.5415,SD371.560000,--TEST
--LS,HI4.920000,HR4.900000
--Warning: Set vertical angles for foresight #1 differ by 0°00'17".
Dave
 
Top

Re: SurvCe 2.00 &n Topcon

Postby pfoley » Mon Jun 18, 2007 11:23 pm

Dave,
I've got the same thing with my Topcon 700 series. No progress yet.

Paul




##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##
pfoley
 
Top

Re: SurvCe 2.00 &n Topcon

Postby Dave » Mon Jun 18, 2007 11:37 pm

Well, It's comforting to know that I am not the only one. It worked great
in version 1.65.


"pfoley" <pfoley@harryrfeldman.com> wrote in message
news:f56m48$lro$1@update.carlsonsw.com...
Dave,
I've got the same thing with my Topcon 700 series. No progress yet.

Paul




##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##
Dave
 
Top

Re: SurvCe 2.00 &n Topcon

Postby pfoley » Tue Jun 19, 2007 3:20 am

Does anyone from Carlson want to chime in on this? This is a serious
issue. I'm sure we are just the first to discover it. Every Topcon is
bound to have this problem...







##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##
pfoley
 
Top

How about Elevations?

Postby Terry Strickland » Tue Jun 19, 2007 6:51 pm

Have you noticed any difference in Elevations in the CRD file?
I haven't looked at my ZA in the raw file, but the elevations seem to
check good. Is this just a problem with turning sets? Maybe something in
settings? This definitely needs some attention.
terry

Dave wrote:
The new version is not reading the Zenith angles correctly in the "Set
Collection" menu. In fact the raw file is giving me zenith angles with the
minutes being over 60'( see excerpt below). My horizontal angles and Slope
Distance is good. What is causing my Zenith angles to have more than 60
minutes?
We are using a Topcon GPT 2003.

Thanks


--Set Collection with Obs Order 123...321...
OC,OP102,N 19180.41500,E 21367.59500,EL421.733,--TRAV
LS,HI4.9200,HR4.9000
BK,OP102,BP101,BS53.3451,BC0.0000
LS,HI4.9200,HR4.9000
BD,OP102,FP101,AR0.0000,ZE86.1647,SD333.765000,--TRAV
LS,HI4.9200,HR5.0300
FD,OP102,FP103A,AR270.4419,ZE90.1556,SD371.560000,--TEST
FR,OP102,FP103A,AR90.4416,ZE269.8669,SD371.560000,--TEST
LS,HI4.9200,HR4.9000
BR,OP102,FP101,AR180.0000,ZE273.7408,SD333.760000,--TRAV
--Warning: Vertical Angles to foresight differ by 0°11'14".
LS,HI4.9200,HR4.9000
BD,OP102,FP101,AR0.0000,ZE86.2789,SD333.765000,--TRAV
LS,HI4.9200,HR5.0300
FD,OP102,FP103A,AR270.4417,ZE90.1528,SD371.560000,--TEST
FR,OP102,FP103A,AR90.4415,ZE269.8675,SD371.560000,--TEST
LS,HI4.9200,HR4.9000
BR,OP102,FP101,AR179.5958,ZE273.7417,SD333.765000,--TRAV
--Warning: Vertical Angles to foresight differ by 0°11'47".
--SS,OP102,FP101,AR0.0000,ZE86.0413,SD333.763750,--TRAV
--LS,HI4.920000,HR5.030000
--SS,OP102,FP103A,AR270.4417,ZE89.5415,SD371.560000,--TEST
--LS,HI4.920000,HR4.900000
--Warning: Set vertical angles for foresight #1 differ by 0°00'17".

Terry Strickland
 
Top

Re: How about Elevations?

Postby Dave » Tue Jun 19, 2007 7:55 pm

So far, I only notice this problem in "Set Collection". The Horizontal and
Slope distance are correct in the RW5 file. I checked all settings and
tried many tests. Right now, I am waiting on Carlson Support. I haven't
notice any problems with elevations in the CRD file.
I would like to know if this is a Topcon Communications problem, or if other
Total Stations are having this problem too? I tried entering a set using
"Manual Total Station." In my RW5 file, it's converting my ZE to Decimal
Degrees, but the Hor angles are in Deg.MMSS.

"Terry Strickland" <jtstrickland@bellsouth.net> wrote in message
news:f58qgi$ah2$1@update.carlsonsw.com...
Have you noticed any difference in Elevations in the CRD file?
I haven't looked at my ZA in the raw file, but the elevations seem to
check good. Is this just a problem with turning sets? Maybe something in
settings? This definitely needs some attention.
terry

Dave wrote:
The new version is not reading the Zenith angles correctly in the "Set
Collection" menu. In fact the raw file is giving me zenith angles with
the minutes being over 60'( see excerpt below). My horizontal angles
and Slope Distance is good. What is causing my Zenith angles to have
more than 60 minutes?
We are using a Topcon GPT 2003.

Thanks


--Set Collection with Obs Order 123...321...
OC,OP102,N 19180.41500,E 21367.59500,EL421.733,--TRAV
LS,HI4.9200,HR4.9000
BK,OP102,BP101,BS53.3451,BC0.0000
LS,HI4.9200,HR4.9000
BD,OP102,FP101,AR0.0000,ZE86.1647,SD333.765000,--TRAV
LS,HI4.9200,HR5.0300
FD,OP102,FP103A,AR270.4419,ZE90.1556,SD371.560000,--TEST
FR,OP102,FP103A,AR90.4416,ZE269.8669,SD371.560000,--TEST
LS,HI4.9200,HR4.9000
BR,OP102,FP101,AR180.0000,ZE273.7408,SD333.760000,--TRAV
--Warning: Vertical Angles to foresight differ by 0°11'14".
LS,HI4.9200,HR4.9000
BD,OP102,FP101,AR0.0000,ZE86.2789,SD333.765000,--TRAV
LS,HI4.9200,HR5.0300
FD,OP102,FP103A,AR270.4417,ZE90.1528,SD371.560000,--TEST
FR,OP102,FP103A,AR90.4415,ZE269.8675,SD371.560000,--TEST
LS,HI4.9200,HR4.9000
BR,OP102,FP101,AR179.5958,ZE273.7417,SD333.765000,--TRAV
--Warning: Vertical Angles to foresight differ by 0°11'47".
--SS,OP102,FP101,AR0.0000,ZE86.0413,SD333.763750,--TRAV
--LS,HI4.920000,HR5.030000
--SS,OP102,FP103A,AR270.4417,ZE89.5415,SD371.560000,--TEST
--LS,HI4.920000,HR4.900000
--Warning: Set vertical angles for foresight #1 differ by 0°00'17".
Dave
 
Top

FIXED IN 2.01

Postby Terry Strickland » Thu Jun 21, 2007 3:08 am

This has been fixed in the latest release.
terry

Dave wrote:
The new version is not reading the Zenith angles correctly in the "Set
Collection" menu. In fact the raw file is giving me zenith angles with the
minutes being over 60'( see excerpt below). My horizontal angles and Slope
Distance is good. What is causing my Zenith angles to have more than 60
minutes?
We are using a Topcon GPT 2003.

Thanks


--Set Collection with Obs Order 123...321...
OC,OP102,N 19180.41500,E 21367.59500,EL421.733,--TRAV
LS,HI4.9200,HR4.9000
BK,OP102,BP101,BS53.3451,BC0.0000
LS,HI4.9200,HR4.9000
BD,OP102,FP101,AR0.0000,ZE86.1647,SD333.765000,--TRAV
LS,HI4.9200,HR5.0300
FD,OP102,FP103A,AR270.4419,ZE90.1556,SD371.560000,--TEST
FR,OP102,FP103A,AR90.4416,ZE269.8669,SD371.560000,--TEST
LS,HI4.9200,HR4.9000
BR,OP102,FP101,AR180.0000,ZE273.7408,SD333.760000,--TRAV
--Warning: Vertical Angles to foresight differ by 0°11'14".
LS,HI4.9200,HR4.9000
BD,OP102,FP101,AR0.0000,ZE86.2789,SD333.765000,--TRAV
LS,HI4.9200,HR5.0300
FD,OP102,FP103A,AR270.4417,ZE90.1528,SD371.560000,--TEST
FR,OP102,FP103A,AR90.4415,ZE269.8675,SD371.560000,--TEST
LS,HI4.9200,HR4.9000
BR,OP102,FP101,AR179.5958,ZE273.7417,SD333.765000,--TRAV
--Warning: Vertical Angles to foresight differ by 0°11'47".
--SS,OP102,FP101,AR0.0000,ZE86.0413,SD333.763750,--TRAV
--LS,HI4.920000,HR5.030000
--SS,OP102,FP103A,AR270.4417,ZE89.5415,SD371.560000,--TEST
--LS,HI4.920000,HR4.900000
--Warning: Set vertical angles for foresight #1 differ by 0°00'17".

Terry Strickland
 
Top

Re: FIXED IN 2.01

Postby jse229 » Mon Jun 25, 2007 6:45 pm

I'm having the same problem with a Calson Explorer 600+ and a Leica
TCR805power. Has version 2.01 also resolved the issue with this equipment?


Thanks

Jason


Terry Strickland wrote:

This has been fixed in the latest release.
terry

Dave wrote:
The new version is not reading the Zenith angles correctly in the
"Set
Collection" menu. In fact the raw file is giving me zenith
angles with the
minutes being over 60'( see excerpt below). My horizontal angles
and Slope
Distance is good. What is causing my Zenith angles to have more
than 60
minutes?
We are using a Topcon GPT 2003.

Thanks


--Set Collection with Obs Order 123...321...
OC,OP102,N 19180.41500,E 21367.59500,EL421.733,--TRAV
LS,HI4.9200,HR4.9000
BK,OP102,BP101,BS53.3451,BC0.0000
LS,HI4.9200,HR4.9000
BD,OP102,FP101,AR0.0000,ZE86.1647,SD333.765000,--TRAV
LS,HI4.9200,HR5.0300
FD,OP102,FP103A,AR270.4419,ZE90.1556,SD371.560000,--TEST
FR,OP102,FP103A,AR90.4416,ZE269.8669,SD371.560000,--TEST
LS,HI4.9200,HR4.9000
BR,OP102,FP101,AR180.0000,ZE273.7408,SD333.760000,--TRAV
--Warning: Vertical Angles to foresight differ by 0°11'14".
LS,HI4.9200,HR4.9000
BD,OP102,FP101,AR0.0000,ZE86.2789,SD333.765000,--TRAV
LS,HI4.9200,HR5.0300
FD,OP102,FP103A,AR270.4417,ZE90.1528,SD371.560000,--TEST
FR,OP102,FP103A,AR90.4415,ZE269.8675,SD371.560000,--TEST
LS,HI4.9200,HR4.9000
BR,OP102,FP101,AR179.5958,ZE273.7417,SD333.765000,--TRAV
--Warning: Vertical Angles to foresight differ by 0°11'47".
--SS,OP102,FP101,AR0.0000,ZE86.0413,SD333.763750,--TRAV
--LS,HI4.920000,HR5.030000
--SS,OP102,FP103A,AR270.4417,ZE89.5415,SD371.560000,--TEST
--LS,HI4.920000,HR4.900000
--Warning: Set vertical angles for foresight #1 differ by
0°00'17".








##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##
jse229
 
Top
Post a reply

Return to SurvCE General

Who is online

Users browsing this forum: No registered users

Powered by phpBB® Forum Software © phpBB Group
Protected by Anti-Spam ACP