I am running the Turnkey Survyor + GPS (surveyor+ survce+ novatel ant) and have been for several months and it works fantastic.
To recieve RTK base correction I use a Verizon MIFI device.
Until recently my procedure is as follows: I dial in, wait to connect to the base, recieve base corrections, wait for the FIX, then off I go.
Now
I am connected to the base station, (connected to base station waiting for reading)
but get the code "not recieveing base corrections"
I have verified my subscription, verified that the base station is opererating correctly, verified the surveyor+ is on the internet (I can google stuff)
I have check the reference station info under : moitor\skyplot> ref tab> the REf sations coords reads "waiting for base position" LAt & Long are 0
Any help would be appreciated