Explorer II locked

Moderator: Carlson Support

Explorer II locked

Postby mccvgb » Tue Mar 16, 2010 10:14 pm

My Explorer II locked on the reboot screen? Any help will be appreciated. I tried taking the battery out/in and still nothing.....
Posts: 2
Joined: Tue Mar 16, 2010 10:08 pm

Postby site admin » Wed Jun 23, 2010 3:26 pm

Hi There
I would try a couple things.
With the unit ON , press and Hold the ON/OFF key for about 10sec. to execute a Restart.,
Let the unit come back ON, if it the unit stay´s locked again then you could try a Invalidation of the Persistent Registry, which can work as a Hard Reset.
With the unit ON ,
Take the battery out and wait about 10sec.
Put the battery back in .
Press and Hold the ESC and Second Key at the same time.
While pressing and holding this 2 keys press and release the ON/OFF key.
The unit should come up and it should display
“ Invalidating the Persistent Registry”
If you don’t see this message then the process was not executed correctly.
Sometimes you have to do it several times.
If the unit still fails to go pass the Reboot Screen then it is possible that you have a hardware failure.
If that’s the case please give us a call for further assistance.

Best Regards

site admin
Site Admin
Posts: 332
Joined: Wed Nov 21, 2007 4:40 pm
Location: Maysville KY

Return to Explorers

Who is online

Users browsing this forum: No registered users