Moderator: Carlson Support
i have a station that everytime they do a qsave it redefines the
survset
block.... how can i stop that?
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
i have a station that everytime they do a qsave it redefines the
survset
block.... how can i stop that?
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
it does not do that on my computer.
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
"Randall McSwain" <rmcswain@carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138E2@WEBSERVER...
That is by design. Settings related to the current drawing are stored
in
that block, so it is updated each time you save.
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138DF@WEBSERVER...
i have a station that everytime they do a qsave it redefines the
survset
block.... how can i stop that?
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
it does not do that on my computer.
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
"Randall McSwain" <rmcswain@carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138E2@WEBSERVER...
That is by design. Settings related to the current drawing are stored
in
that block, so it is updated each time you save.
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138DF@WEBSERVER...
i have a station that everytime they do a qsave it redefines the
survset
block.... how can i stop that?
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
it sure is.. what does that do??
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
"Randall McSwain" <rmcswain@carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138F4@WEBSERVER...
Is your "Save Drawing INI files" checked OFF under Configure SurvCADD
|
General Settings"?
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138E5@WEBSERVER...
it does not do that on my computer.
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
"Randall McSwain" <rmcswain@carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138E2@WEBSERVER...
That is by design. Settings related to the current drawing are
stored in
that block, so it is updated each time you save.
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138DF@WEBSERVER...
i have a station that everytime they do a qsave it redefines the
survset
block.... how can i stop that?
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
unchecked
sorry my fiancé hates it when i answer questions like that..
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138F7@WEBSERVER...
it sure is.. what does that do??
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
"Randall McSwain" <rmcswain@carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138F4@WEBSERVER...
Is your "Save Drawing INI files" checked OFF under Configure
SurvCADD |
General Settings"?
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138E5@WEBSERVER...
it does not do that on my computer.
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
"Randall McSwain" <rmcswain@carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138E2@WEBSERVER...
That is by design. Settings related to the current drawing are
stored in
that block, so it is updated each time you save.
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138DF@WEBSERVER...
i have a station that everytime they do a qsave it redefines the
survset
block.... how can i stop that?
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
unchecked
sorry my fiancé hates it when i answer questions like that..
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138F7@WEBSERVER...
it sure is.. what does that do??
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
"Randall McSwain" <rmcswain@carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138F4@WEBSERVER...
Is your "Save Drawing INI files" checked OFF under Configure
SurvCADD |
General Settings"?
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138E5@WEBSERVER...
it does not do that on my computer.
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
"Randall McSwain" <rmcswain@carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138E2@WEBSERVER...
That is by design. Settings related to the current drawing are
stored
that block, so it is updated each time you save.
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE590138DF@WEBSERVER...
i have a station that everytime they do a qsave it redefines the
survset
block.... how can i stop that?
--
A2Ki, SurvCad CES, Win98 se
Remove NO SPAM from my email address to email
Jonathan J. Baker
R&R Engineers-Surveyors, Inc.
Denver, Colorado
_________________________
personally i like one less block in the drawing... smaller drawing...
but could this be the problem that i am having with the drawings after
opening they get changed so i have to either save or not to close the
drawing rather then just closing it?
personally i like one less block in the drawing... smaller drawing...
but could this be the problem that i am having with the drawings after
opening they get changed so i have to either save or not to close the
drawing rather then just closing it?
I've mentioned a while back that this block doesn't always get saved.
Sometimes you will need to save a second time until you get the
message......Redefining block "SURVSETV". I believe it does not save
it on
the first save attempt after opening, but I'm not sure.
Jason
"Randall McSwain" <rmcswain@carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59013904@WEBSERVER...
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote
personally i like one less block in the drawing... smaller
drawing...
Without this block, the drawing will not remember things like
Horizontal
Scale, Metric vs. English, text size, symbol size, etc.
Drawing size is virtually not affected
24,286 bytes (without block)
25,904 bytes (with block)
but could this be the problem that i am having with the drawings
after
opening they get changed so i have to either save or not to close
the
drawing rather then just closing it?
No, the block is only written when you save or when you make a change
to
of the affected settings.
what is the point of saving this block every single time you save the
same
drawing? if the variables are set in the drawing do they not stay that
way?
or do things with survcad change these variables and do not change
them
back?
if i open and edit a drawing in the core acad, it does not change
anything
and i can go my merry way.. why do things change from one setting to
another
and then do not go back to the way they were. take label contours for
example, the program works good (if there are no 0 length poly line
segments) but you need to reset the osnaps after each use.
i personally, do not want to create a harddisk cluttering ini file
with
every save, i don't create bak files either. give us the option to
create
this survset block or not. i choose not to create this block.
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE5901390A@WEBSERVER...
I'm afraid that the SURVSETV block will always be there.
----------------------------
Randall McSwain
Carlson Software
"Randall McSwain" <rmcswain@update.carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE5901390D@WEBSERVER...
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE5901390A@WEBSERVER...
major snipage
I'm afraid that the SURVSETV block will always be there.
----------------------------
Randall McSwain
Carlson Software
I'm mostly ignorant of real Acad programming, but have dabbled in it
for some
minor routines. Is there no way to store these settings in a user
defined
dictionary dictionary? The block method is simple, but seems very
vulnerable.
It's a pain to avoid during purges for example.
Terrence Scanlon
Davis, Bowen, & Friedel, Inc.
tps@dbfinc.com
"Randall McSwain" <rmcswain@update.carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE5901390D@WEBSERVER...
"Jon Baker" <jonathanjbakerNO@SPAMhotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE5901390A@WEBSERVER...
major snipage
I'm afraid that the SURVSETV block will always be there.
----------------------------
Randall McSwain
Carlson Software
I'm mostly ignorant of real Acad programming, but have dabbled in it
for
minor routines. Is there no way to store these settings in a user
defined
dictionary dictionary? The block method is simple, but seems very
vulnerable.
It's a pain to avoid during purges for example.
Terrence Scanlon
Davis, Bowen, & Friedel, Inc.
tps@dbfinc.com
Return to General Carlson Discussion
Users browsing this forum: No registered users