Carlson Software Forum

Platform: Survcadd 2000, Autocad 2000

We have created a 3d polyline using the 'profile to 3d polyline' routine
in
section-profile. This is a centerline profile. when one offsets the
polyline,
the vertices area nowhere near oposite the original polyline. Infact,
there is
a spot where the new polyline reverses direction upon itself. The
centerline
has slopes from 0.5-1.0%, the cross slope is 2%, and the horizontal
offset is
11.0'.

This is very strange and disturbing. We have tried many variations on
the theme
(no vert. offset, heavy poly, resolve the cl, etc.).
Any ideas?


Terrence Scanlon

Davis, Bowen, & Friedel, Inc.
tps@dbfinc.com

Can you post the DWG (just WBLOCK out the pline) over in customer-files?
This is something probably easier to discover with DWG in hand.

Thanks.


"Terry Scanlon" <tpsx@dbfinc.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59013CC0@WEBSERVER...

Platform: Survcadd 2000, Autocad 2000

We have created a 3d polyline using the 'profile to 3d polyline'
routine in
section-profile. This is a centerline profile. when one offsets the
polyline,
the vertices area nowhere near oposite the original polyline. Infact,
there is
a spot where the new polyline reverses direction upon itself. The
centerline
has slopes from 0.5-1.0%, the cross slope is 2%, and the horizontal
offset is
11.0'.

This is very strange and disturbing. We have tried many variations on
the theme
(no vert. offset, heavy poly, resolve the cl, etc.).
Any ideas?


Terrence Scanlon

Davis, Bowen, & Friedel, Inc.
tps@dbfinc.com

Terry,

I tried to email a fix to you, but the email bounced. Send me an
email and I will send the fix back to you.

--
Randall McSwain
Carlson Software
rmcswain@carlsonsw.com
http://www.carlsonsw.com

I just wanted to say thanks to Randall and the SurvCadd team publically.

This was great service and response time! Many companies don't fully
invest in
internet support. This is an example of how it works best.

Terrence Scanlon

Davis, Bowen, & Friedel, Inc.
23 North Walnut Street
Milford, Delaware 19963
tps@dbfinc.com

"Randall McSwain" <rmcswain@carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE5901405C@WEBSERVER...
Terry,

I tried to email a fix to you, but the email bounced. Send me an
email and I
will send the fix back to you.

--
Randall McSwain
Carlson Software
rmcswain@carlsonsw.com
http://www.carlsonsw.com