Carlson Software Forum

We are currently demoing a Carlson Explorer. It is truly fantastic. We
are
interested in its' GPS capabilities as well but use older Trimble gear
(4400). Using the Trimble 4000 instrument setting, I can connect to the
receivers but cannot set them up for RTK. The manual is not very
descriptive on the interoperation of the two. To your knowledge, has this
ever been attempted? If so, was it successful? Is the lack of support
for
these older receivers because of Trimbles lack of cooperation? If the
latter is the case, is programming SurvCE for use with these receivers
something that Carlson would be interested in? We might be willing to
loan
our receivers for that task.

Thank you.

Rob,
Try selecting Trimble GPS General as your instrument under the
Equipment Pulldown. When you're configuring the Base and Rover choose
Other
as your receiver type.

--
John

John W. VanMeter
Carlson Software
800-367-1157
"Rob Cross" <ssorcbor@cinci.rr.com> wrote in message
news:cvltjo$6fe$1@update.carlsonsw.com...
We are currently demoing a Carlson Explorer. It is truly fantastic. We
are
interested in its' GPS capabilities as well but use older Trimble gear
(4400). Using the Trimble 4000 instrument setting, I can connect to the
receivers but cannot set them up for RTK. The manual is not very
descriptive on the interoperation of the two. To your knowledge, has
this
ever been attempted? If so, was it successful? Is the lack of support
for
these older receivers because of Trimbles lack of cooperation? If the
latter is the case, is programming SurvCE for use with these receivers
something that Carlson would be interested in? We might be willing to
loan
our receivers for that task.

Thank you.

Thanks for the reply. I tried that yesterday and was unsuccessful. I am,
however, going to try it again this weekend as well as some of the other
settings. I was tired, cold and frustrated at the end of yesterday and
gave
up too quickly.


"John VanMeter" <jvanmeter@carlsonsw.com> wrote in message
news:cvnc5v$jto$1@update.carlsonsw.com...
Rob,
Try selecting Trimble GPS General as your instrument under the
Equipment Pulldown. When you're configuring the Base and Rover choose
Other
as your receiver type.

--
John

John W. VanMeter
Carlson Software
800-367-1157
"Rob Cross" <ssorcbor@cinci.rr.com> wrote in message
news:cvltjo$6fe$1@update.carlsonsw.com...
We are currently demoing a Carlson Explorer. It is truly fantastic.
We
are
interested in its' GPS capabilities as well but use older Trimble gear
(4400). Using the Trimble 4000 instrument setting, I can connect to
the
receivers but cannot set them up for RTK. The manual is not very
descriptive on the interoperation of the two. To your knowledge, has
this
ever been attempted? If so, was it successful? Is the lack of
support
for
these older receivers because of Trimbles lack of cooperation? If the
latter is the case, is programming SurvCE for use with these receivers
something that Carlson would be interested in? We might be willing to
loan
our receivers for that task.

Thank you.

Rob,
Try selecting Trimble GPS General as your instrument under the
Equipment Pulldown. When you're configuring the Base and Rover choose
Other
as your receiver type.

--
John

John W. VanMeter
Carlson Software
800-367-1157
"Rob Cross" <ssorcbor@cinci.rr.com> wrote in message
news:cvltjo$6fe$1@update.carlsonsw.com...
We are currently demoing a Carlson Explorer. It is truly fantastic. We
are
interested in its' GPS capabilities as well but use older Trimble gear
(4400). Using the Trimble 4000 instrument setting, I can connect to the
receivers but cannot set them up for RTK. The manual is not very
descriptive on the interoperation of the two. To your knowledge, has
this
ever been attempted? If so, was it successful? Is the lack of support
for
these older receivers because of Trimbles lack of cooperation? If the
latter is the case, is programming SurvCE for use with these receivers
something that Carlson would be interested in? We might be willing to
loan
our receivers for that task.

Thank you.