C&G 18 - Drawing Inspector went on vacation
Posted: Wed Nov 19, 2008 12:59 pmI have four (4) seats running CGSurvey 18 for Autocad.
For the first two weeks the Drawing Spector worked great.
It's a very useful feature.
Shortly after the first two week breakin period, we noticed that the "Drawing Inspector" did not work. All four seats have one-by-one suffered the same problem.
We've tried all of the combinations of C&G and AutoCAD toggles and options that we can think of - but there is simply no response when the Drawing Inspector Box is checked. It is totaly disfunctional.
Any ideas?
For the first two weeks the Drawing Spector worked great.
It's a very useful feature.
Shortly after the first two week breakin period, we noticed that the "Drawing Inspector" did not work. All four seats have one-by-one suffered the same problem.
We've tried all of the combinations of C&G and AutoCAD toggles and options that we can think of - but there is simply no response when the Drawing Inspector Box is checked. It is totaly disfunctional.
Any ideas?