Page 1 of 1

Hardware Lock not found

PostPosted: Thu Sep 13, 2001 5:27 pm
by Richard Henline
There are several things we can try to get the hardware lock to be read.

1. Attach the hardware lock. (Don’t over look the obvious)
2. For windows NT and 2000 you need to install the sentinel drivers (see link below)
3. Set you parallel port mode to ECP, EPP or ECP/EPP. (See your computer manuals)
4. Some customers were sent a floppy disk with a .dat file and the blockfix, blockwrite and blockcheck utilities. If this is the case you will need to go through that same process again.
5. The hardware lock might be bad. If you have access to another computer tray it on the other computer first.
6. Your parallel port might be blown, remove the block and try printing something to a printer attached to the parallel port.
7. Take the block off and turn it clockwise seven times then counter clockwise five times and clockwise ten times this will unlock the code. (Just Kidding)<br

Re: Hardware Lock not found

PostPosted: Wed Jan 16, 2002 7:21 pm
by Jeff Smith
HERE IS THE FIX GUYS THIS LINK WILL TAKE YOU TO THE DRIVER DOWNLOAD.
http://www.rainbow.com/tech/downloads.html

Your screen will look like this:
Welcome to the Rainbow Technologies Download Area!

Select your product: ---- iKey 1000 iKey 2000 NetSentinel SentinelCplus SentinelEve3 SentinelLM SentinelPro SentinelScribe SentinelSuperPro SentinelSuperProNet System Drivers

Click Here for Current Sentinel System Drivers (5.39.2)
Please note: These drivers are for the following Products
Sentinel Superpro, Sentinel Pro, Sentinel SuperproNet
NetSentinel, Sentinel Scribe & Sentinel Cplus
Works with Win95/98/ME/NT/2000/XP

YOU WANT TO "CLICK HERE FOR CURRENT SENTINEL DRIVERS" YEP JUST CLICK IT AND IT WILL TAKE YOU TO ANOITHER SCREEN WITH THREE SELECTIONS.



IT IS THE ONE IN THE MIDDLE THAT YOU WANT TO SELECT.NOT THE ONE ON TOP NOR THE ONE ON BOTTOM THE ONE IN THE MIDDLE 'DRIVERS ONLY" DOWNLOAD IT AND YOU WILL HAVE A ZIP FILE, OPEN THE ZIP AND YOU HAVE AN .EXE FILE RUN THAT FILE AND YOU WILL BE OUT OF DEMO!<p