Carlson Software Forum

I have CG-FieldPlus running on a Huskey FS2. According to this website, this software can export in a SDR33 file format.

Can anyone shed some light on how this is done?

Many thanks...

Sincerely,
Joe Hedrick, L

In field plus select from system options menu either sdr2 or sdr33. When you go into transfer the option you want is #2, the one that says SDR Transfer routine. You can then follow the instructions.
com settings should be
baud 9600
parity none
data bits 8
stop bits 1
com port refers to port on d/c NOT DESKTOP
xon\xoff type of handshaking
good luc