Converting blocks from DOS to WIN

[Chad]

Hi All,

We have finally decided to switch over from DOS to Windows for CG. But the
blocks from DOS are not the same through the export. This is what I am
doing

In CG for DOS, I do the data conversion to DXF. I have tried all
combinations of (1&2) (A&B).

But my block for the drawing information is a bit bigger and has moved
outside my drawing limits. We have lots of drawings to convert, and I don't
want to have to modify every one of them.

Am I doing something wrong, or is there an easy way around this?

Thanks

Chad

PS
DOS ver 4.40.16
WIN ver 5.50.03 w/ IntelliCAD
OS Win 98SE
ACAD 2000