Turn off Coordinate tracking on crosshairs

Moderator: Carlson Support

Turn off Coordinate tracking on crosshairs

Postby Yahooty » Sat Aug 13, 2022 10:37 pm

I'm running Carlson Survey 2021. I have somehow turned on the option to track coordinates on my crosshairs. Anyone know how to turn that off?

Thanks in advance.
Yahooty
 
Posts: 20
Joined: Wed Nov 12, 2014 3:40 pm
Location: Oregon

Re: Turn off Coordinate tracking on crosshairs

Postby gskelhorn » Sun Aug 14, 2022 12:22 pm

I don't have standalone survey but a couple of things to check:

Drawing Inspector: If enabled, and depending on options selected, will popup a box with coordinate information. Right click and choose Exit Drawing Inspector if it is in the menu.

Dynamic input: Run command DYNMODE. Note the current value. If it is not zero then set it to zero. If that was not the issue then you can run DYNMODE again to set to the original value again.
gskelhorn
 
Posts: 185
Joined: Tue Nov 03, 2009 12:56 am

Re: Turn off Coordinate tracking on crosshairs

Postby Yahooty » Sun Aug 14, 2022 5:45 pm

Ahhhhhh! thanks much. The DYNMODE was the answer!! Thank you
Yahooty
 
Posts: 20
Joined: Wed Nov 12, 2014 3:40 pm
Location: Oregon


Return to Survey

Who is online

Users browsing this forum: No registered users

cron