AEC-Contour Labels

[Harley Pawley]

I browsed the history and didn't see an anser to this:

I have drawings created by AutoCAD 14 / Softdesk 8 with AEC-Contours labeled
with foot to nearest foot. When I open the drawings with Carlson Survey
2004, the labels change to nearest 0.01'.

Is there any way to remedy this? I could not explode them at all to fix the
text...

Thanks!
Harley

[Barkley Hensley]

I am not sure what is going on here. I guess i would check the units
setting in Survey and make sure it is set to 0 decimal places. If this
doesn't do the trick I would probably need to take a look at the drawing
to see if we could come up with something.


Harley Pawley wrote:

I browsed the history and didn't see an anser to this:

I have drawings created by AutoCAD 14 / Softdesk 8 with AEC-Contours labeled
with foot to nearest foot. When I open the drawings with Carlson Survey
2004, the labels change to nearest 0.01'.

Is there any way to remedy this? I could not explode them at all to fix the
text...

Thanks!
Harley

[Harley Pawley]

Barkley,
Here is the history after opening a Softdesk drawing:

Loading AecBase40...
Loading AecCivilBase...Error code (0x2) The system cannot find the file
specified.

AcRxDynamicLinker failed to load 'AecUiBase40STAR2004.arx'
C:\Program Files\Carlson Software 2004\STAR.exe
Opening a Release 14/LT 97/LT 98 format file.
Regenerating layout.
Regenerating model.

Grid too dense to display

Grid too dense to display

Grid too dense to display

Loading Carlson Software ...
Carlson Software 2004
Copyright(c) 1992-2003 Carlson Software.
All rights reserved.

It happens with any drawing with contours. I open the drawings in V14 and
check the units, etc. It is normal settings - Decimal, 2-place precision
normal and 0-place precision on contour labels. When I open it in Carlson
2004, the units are set to Architectual. I then set them to Decimal 0-place
with no change to the contour labels with a regen.

RE: the object enablers, I downloaded and installed the file from your
website, but it still looks like something fails according to the history
above. I bet that could be it.

Thanks for the help!

Harley



"Barkley Hensley" <bhensley@carlsonsw.com> wrote in message
news:db5l9r$ian$1@update.carlsonsw.com...

I am not sure what is going on here. I guess i would check the units
setting in Survey and make sure it is set to 0 decimal places. If this
doesn't do the trick I would probably need to take a look at the drawing
to see if we could come up with something.


Harley Pawley wrote:

I browsed the history and didn't see an anser to this:

I have drawings created by AutoCAD 14 / Softdesk 8 with AEC-Contours
labeled
with foot to nearest foot. When I open the drawings with Carlson Survey
2004, the labels change to nearest 0.01'.

Is there any way to remedy this? I could not explode them at all to fix
the
text...

Thanks!
Harley

[Harley Pawley]

I downloaded and installed the latest LDT2004Object Enabler, but I am still
getting the same error message upon opening drawings and the contour labels
still to the 0.01'.

Any suggestions?

"Harley Pawley" <harleyp@alphasub.com> wrote in message
news:db5unv$n8v$1@update.carlsonsw.com...

Barkley,
Here is the history after opening a Softdesk drawing:

Loading AecBase40...
Loading AecCivilBase...Error code (0x2) The system cannot find the file
specified.

AcRxDynamicLinker failed to load 'AecUiBase40STAR2004.arx'
C:\Program Files\Carlson Software 2004\STAR.exe
Opening a Release 14/LT 97/LT 98 format file.
Regenerating layout.
Regenerating model.

Grid too dense to display

Grid too dense to display

Grid too dense to display

Loading Carlson Software ...
Carlson Software 2004
Copyright(c) 1992-2003 Carlson Software.
All rights reserved.

It happens with any drawing with contours. I open the drawings in V14 and
check the units, etc. It is normal settings - Decimal, 2-place precision
normal and 0-place precision on contour labels. When I open it in Carlson
2004, the units are set to Architectual. I then set them to Decimal
0-place
with no change to the contour labels with a regen.

RE: the object enablers, I downloaded and installed the file from your
website, but it still looks like something fails according to the history
above. I bet that could be it.

Thanks for the help!

Harley



"Barkley Hensley" <bhensley@carlsonsw.com> wrote in message
news:db5l9r$ian$1@update.carlsonsw.com...
I am not sure what is going on here. I guess i would check the units
setting in Survey and make sure it is set to 0 decimal places. If this
doesn't do the trick I would probably need to take a look at the drawing
to see if we could come up with something.


Harley Pawley wrote:

I browsed the history and didn't see an anser to this:

I have drawings created by AutoCAD 14 / Softdesk 8 with AEC-Contours
labeled
with foot to nearest foot. When I open the drawings with Carlson
Survey
2004, the labels change to nearest 0.01'.

Is there any way to remedy this? I could not explode them at all to
fix
the
text...

Thanks!
Harley

[John W. VanMeter]

Harley,
Send us a copy of the drawing and we'll see if we can duplicate the
problem.
John

"Harley Pawley" <harleyp@alphasub.com> wrote in message
news:dbj3sh$41v$1@update.carlsonsw.com...

I downloaded and installed the latest LDT2004Object Enabler, but I am still
getting the same error message upon opening drawings and the contour
labels
still to the 0.01'.

Any suggestions?

"Harley Pawley" <harleyp@alphasub.com> wrote in message
news:db5unv$n8v$1@update.carlsonsw.com...
Barkley,
Here is the history after opening a Softdesk drawing:

Loading AecBase40...
Loading AecCivilBase...Error code (0x2) The system cannot find the file
specified.

AcRxDynamicLinker failed to load 'AecUiBase40STAR2004.arx'
C:\Program Files\Carlson Software 2004\STAR.exe
Opening a Release 14/LT 97/LT 98 format file.
Regenerating layout.
Regenerating model.

Grid too dense to display

Grid too dense to display

Grid too dense to display

Loading Carlson Software ...
Carlson Software 2004
Copyright(c) 1992-2003 Carlson Software.
All rights reserved.

It happens with any drawing with contours. I open the drawings in V14
and
check the units, etc. It is normal settings - Decimal, 2-place precision
normal and 0-place precision on contour labels. When I open it in
Carlson
2004, the units are set to Architectual. I then set them to Decimal
0-place
with no change to the contour labels with a regen.

RE: the object enablers, I downloaded and installed the file from your
website, but it still looks like something fails according to the history
above. I bet that could be it.

Thanks for the help!

Harley



"Barkley Hensley" <bhensley@carlsonsw.com> wrote in message
news:db5l9r$ian$1@update.carlsonsw.com...
I am not sure what is going on here. I guess i would check the units
setting in Survey and make sure it is set to 0 decimal places. If this
doesn't do the trick I would probably need to take a look at the
drawing
to see if we could come up with something.


Harley Pawley wrote:

I browsed the history and didn't see an anser to this:

I have drawings created by AutoCAD 14 / Softdesk 8 with AEC-Contours
labeled
with foot to nearest foot. When I open the drawings with Carlson
Survey
2004, the labels change to nearest 0.01'.

Is there any way to remedy this? I could not explode them at all to
fix
the
text...

Thanks!
Harley

[Harley C. Pawley]

Is there an AecCivilCogo object enabler in existence or is Carlson looking
for the wrong thing?

Here's my opening dialog:

Checking for object enablers on the Autodesk website
Carlson Software has not found an object enabler on the Autodesk website for
AecCivilCogo
Carlson Software has not found an object enabler on the Autodesk website for
AecCivilCogo

Loading AecBase40...
Loading AecCivilBase...Carlson Software has not found an object enabler on
the
Autodesk website for AecUiBase40STAR2004
Error code (0x2) The system cannot find the file specified.

AcRxDynamicLinker failed to load 'AecUiBase40STAR2004.arx'
C:\Program Files\Carlson Software 2004\STAR.exe
Opening a Release 14/LT 97/LT 98 format file.
Regenerating model.


Harley Pawley



"John W. VanMeter" <jvanmeter@carlsonsw.com> wrote in message
news:dblo7u$bfu$1@update.carlsonsw.com...

Harley,
Send us a copy of the drawing and we'll see if we can duplicate the
problem.
John

"Harley Pawley" <harleyp@alphasub.com> wrote in message
news:dbj3sh$41v$1@update.carlsonsw.com...
I downloaded and installed the latest LDT2004Object Enabler, but I am
still
getting the same error message upon opening drawings and the contour
labels
still to the 0.01'.

Any suggestions?

"Harley Pawley" <harleyp@alphasub.com> wrote in message
news:db5unv$n8v$1@update.carlsonsw.com...
Barkley,
Here is the history after opening a Softdesk drawing:

Loading AecBase40...
Loading AecCivilBase...Error code (0x2) The system cannot find the file
specified.

AcRxDynamicLinker failed to load 'AecUiBase40STAR2004.arx'
C:\Program Files\Carlson Software 2004\STAR.exe
Opening a Release 14/LT 97/LT 98 format file.
Regenerating layout.
Regenerating model.

Grid too dense to display

Grid too dense to display

Grid too dense to display

Loading Carlson Software ...
Carlson Software 2004
Copyright(c) 1992-2003 Carlson Software.
All rights reserved.

It happens with any drawing with contours. I open the drawings in V14
and
check the units, etc. It is normal settings - Decimal, 2-place
precision
normal and 0-place precision on contour labels. When I open it in
Carlson
2004, the units are set to Architectual. I then set them to Decimal
0-place
with no change to the contour labels with a regen.

RE: the object enablers, I downloaded and installed the file from your
website, but it still looks like something fails according to the
history
above. I bet that could be it.

Thanks for the help!

Harley



"Barkley Hensley" <bhensley@carlsonsw.com> wrote in message
news:db5l9r$ian$1@update.carlsonsw.com...
I am not sure what is going on here. I guess i would check the units
setting in Survey and make sure it is set to 0 decimal places. If
this
doesn't do the trick I would probably need to take a look at the
drawing
to see if we could come up with something.


Harley Pawley wrote:

I browsed the history and didn't see an anser to this:

I have drawings created by AutoCAD 14 / Softdesk 8 with
AEC-Contours
labeled
with foot to nearest foot. When I open the drawings with Carlson
Survey
2004, the labels change to nearest 0.01'.

Is there any way to remedy this? I could not explode them at all
to
fix
the
text...

Thanks!
Harley

[Harley C. Pawley]

Survey 2006 does the same thing...

"Harley C. Pawley" <harley@alphasub.com> wrote in message
news:dc8b60$u7e$1@update.carlsonsw.com...

Is there an AecCivilCogo object enabler in existence or is Carlson looking
for the wrong thing?

Here's my opening dialog:

Checking for object enablers on the Autodesk website
Carlson Software has not found an object enabler on the Autodesk website
for
AecCivilCogo
Carlson Software has not found an object enabler on the Autodesk website
for
AecCivilCogo

Loading AecBase40...
Loading AecCivilBase...Carlson Software has not found an object enabler on
the
Autodesk website for AecUiBase40STAR2004
Error code (0x2) The system cannot find the file specified.

AcRxDynamicLinker failed to load 'AecUiBase40STAR2004.arx'
C:\Program Files\Carlson Software 2004\STAR.exe
Opening a Release 14/LT 97/LT 98 format file.
Regenerating model.


Harley Pawley



"John W. VanMeter" <jvanmeter@carlsonsw.com> wrote in message
news:dblo7u$bfu$1@update.carlsonsw.com...
Harley,
Send us a copy of the drawing and we'll see if we can duplicate the
problem.
John

"Harley Pawley" <harleyp@alphasub.com> wrote in message
news:dbj3sh$41v$1@update.carlsonsw.com...
I downloaded and installed the latest LDT2004Object Enabler, but I am
still
getting the same error message upon opening drawings and the contour
labels
still to the 0.01'.

Any suggestions?

"Harley Pawley" <harleyp@alphasub.com> wrote in message
news:db5unv$n8v$1@update.carlsonsw.com...
Barkley,
Here is the history after opening a Softdesk drawing:

Loading AecBase40...
Loading AecCivilBase...Error code (0x2) The system cannot find the
file
specified.

AcRxDynamicLinker failed to load 'AecUiBase40STAR2004.arx'
C:\Program Files\Carlson Software 2004\STAR.exe
Opening a Release 14/LT 97/LT 98 format file.
Regenerating layout.
Regenerating model.

Grid too dense to display

Grid too dense to display

Grid too dense to display

Loading Carlson Software ...
Carlson Software 2004
Copyright(c) 1992-2003 Carlson Software.
All rights reserved.

It happens with any drawing with contours. I open the drawings in
V14
and
check the units, etc. It is normal settings - Decimal, 2-place
precision
normal and 0-place precision on contour labels. When I open it in
Carlson
2004, the units are set to Architectual. I then set them to Decimal
0-place
with no change to the contour labels with a regen.

RE: the object enablers, I downloaded and installed the file from
your
website, but it still looks like something fails according to the
history
above. I bet that could be it.

Thanks for the help!

Harley



"Barkley Hensley" <bhensley@carlsonsw.com> wrote in message
news:db5l9r$ian$1@update.carlsonsw.com...
I am not sure what is going on here. I guess i would check the
units
setting in Survey and make sure it is set to 0 decimal places. If
this
doesn't do the trick I would probably need to take a look at the
drawing
to see if we could come up with something.


Harley Pawley wrote:

I browsed the history and didn't see an anser to this:

I have drawings created by AutoCAD 14 / Softdesk 8 with
AEC-Contours
labeled
with foot to nearest foot. When I open the drawings with Carlson
Survey
2004, the labels change to nearest 0.01'.

Is there any way to remedy this? I could not explode them at all
to
fix
the
text...

Thanks!
Harley

[Wendy]

I am having the same problem. Maybe I'm just not seeing it, but was this
problem ever resolved? How did you fix it?



##-----------------------------------------------##
Article posted with MyNewsGroups
http://mynewsgroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##