Substitute Carlson Point Blocks?

[Scott]

Hi there

Is there anyway that I can redefine the SRVPNO1 block with a block of a
different design but still retain the point elevation details?

Alternatively is there a way to use a different block design in the field
survey but still have the elevation attribute of the block filled in with
the data from the CRD file.

[Nava Ran]

Attribute Layout ID: Controls the location of the point number, elevation
and description. These attribute layouts are defined in AutoCAD drawings
that are stored in the Carlson Survey SUP directory with the file name of
SRVPNO plus the ID number (i.e. SRVPNO1.DWG, SRVPNO2.DWG, etc.). If you want
to change the attribute positions for a layout ID, then open and edit the
associated SRVPNO drawing.

"Scott" <scott.collingwood@braziermotti.com.au> wrote in message
news:dfqmbr$teq$1@update.carlsonsw.com...

Hi there

Is there anyway that I can redefine the SRVPNO1 block with a block of a
different design but still retain the point elevation details?

Alternatively is there a way to use a different block design in the field
survey but still have the elevation attribute of the block filled in with
the data from the CRD file.

[Scott]

Yep, got that one. Can I them rename the block?

I need to have the data in the point bolck appear in another block called
6fsl_v1.

Its a Local Govt. requirement where I am.

"Nava Ran" <navaran@zahav.net.il> wrote in message
news:dfrlv0$7ge$1@update.carlsonsw.com...

Attribute Layout ID: Controls the location of the point number, elevation
and description. These attribute layouts are defined in AutoCAD drawings
that are stored in the Carlson Survey SUP directory with the file name of
SRVPNO plus the ID number (i.e. SRVPNO1.DWG, SRVPNO2.DWG, etc.). If you
want to change the attribute positions for a layout ID, then open and edit
the associated SRVPNO drawing.

"Scott" <scott.collingwood@braziermotti.com.au> wrote in message
news:dfqmbr$teq$1@update.carlsonsw.com...
Hi there

Is there anyway that I can redefine the SRVPNO1 block with a block of a
different design but still retain the point elevation details?

Alternatively is there a way to use a different block design in the field
survey but still have the elevation attribute of the block filled in with
the data from the CRD file.

[Nava Ran]

Edit>Change>Block/Inserts>Substitute

"Scott" <scott.collingwood@braziermotti.com.au> wrote in message
news:dg5aab$4hq$1@update.carlsonsw.com...

Yep, got that one. Can I them rename the block?

I need to have the data in the point bolck appear in another block called
6fsl_v1.

Its a Local Govt. requirement where I am.

"Nava Ran" <navaran@zahav.net.il> wrote in message
news:dfrlv0$7ge$1@update.carlsonsw.com...
Attribute Layout ID: Controls the location of the point number, elevation
and description. These attribute layouts are defined in AutoCAD drawings
that are stored in the Carlson Survey SUP directory with the file name of
SRVPNO plus the ID number (i.e. SRVPNO1.DWG, SRVPNO2.DWG, etc.). If you
want to change the attribute positions for a layout ID, then open and
edit the associated SRVPNO drawing.

"Scott" <scott.collingwood@braziermotti.com.au> wrote in message
news:dfqmbr$teq$1@update.carlsonsw.com...
Hi there

Is there anyway that I can redefine the SRVPNO1 block with a block of a
different design but still retain the point elevation details?

Alternatively is there a way to use a different block design in the
field survey but still have the elevation attribute of the block filled
in with the data from the CRD file.

[Scott]

When I do this the elevation value disappear. Does the Attribute Tag have to
be the same for both blocks ?

"Nava Ran" <navaran@zahav.net.il> wrote in message
news:dg62s3$bif$1@update.carlsonsw.com...

Edit>Change>Block/Inserts>Substitute

"Scott" <scott.collingwood@braziermotti.com.au> wrote in message
news:dg5aab$4hq$1@update.carlsonsw.com...
Yep, got that one. Can I them rename the block?

I need to have the data in the point bolck appear in another block called
6fsl_v1.

Its a Local Govt. requirement where I am.

"Nava Ran" <navaran@zahav.net.il> wrote in message
news:dfrlv0$7ge$1@update.carlsonsw.com...
Attribute Layout ID: Controls the location of the point number,
elevation and description. These attribute layouts are defined in
AutoCAD drawings that are stored in the Carlson Survey SUP directory
with the file name of SRVPNO plus the ID number (i.e. SRVPNO1.DWG,
SRVPNO2.DWG, etc.). If you want to change the attribute positions for a
layout ID, then open and edit the associated SRVPNO drawing.

"Scott" <scott.collingwood@braziermotti.com.au> wrote in message
news:dfqmbr$teq$1@update.carlsonsw.com...
Hi there

Is there anyway that I can redefine the SRVPNO1 block with a block of a
different design but still retain the point elevation details?

Alternatively is there a way to use a different block design in the
field survey but still have the elevation attribute of the block filled
in with the data from the CRD file.

[Nava Ran]

The attibutes of 66fsl_v1 must be the same as in srpno# you want to
substitute.

"Scott" <scott.collingwood@braziermotti.com.au> wrote in message
news:dg8c9k$cj8$1@update.carlsonsw.com...

When I do this the elevation value disappear. Does the Attribute Tag have
to be the same for both blocks ?

"Nava Ran" <navaran@zahav.net.il> wrote in message
news:dg62s3$bif$1@update.carlsonsw.com...
Edit>Change>Block/Inserts>Substitute

"Scott" <scott.collingwood@braziermotti.com.au> wrote in message
news:dg5aab$4hq$1@update.carlsonsw.com...
Yep, got that one. Can I them rename the block?

I need to have the data in the point bolck appear in another block
called 6fsl_v1.

Its a Local Govt. requirement where I am.

"Nava Ran" <navaran@zahav.net.il> wrote in message
news:dfrlv0$7ge$1@update.carlsonsw.com...
Attribute Layout ID: Controls the location of the point number,
elevation and description. These attribute layouts are defined in
AutoCAD drawings that are stored in the Carlson Survey SUP directory
with the file name of SRVPNO plus the ID number (i.e. SRVPNO1.DWG,
SRVPNO2.DWG, etc.). If you want to change the attribute positions for a
layout ID, then open and edit the associated SRVPNO drawing.

"Scott" <scott.collingwood@braziermotti.com.au> wrote in message
news:dfqmbr$teq$1@update.carlsonsw.com...
Hi there

Is there anyway that I can redefine the SRVPNO1 block with a block of
a different design but still retain the point elevation details?

Alternatively is there a way to use a different block design in the
field survey but still have the elevation attribute of the block
filled in with the data from the CRD file.