Carlson Software Forum

Posted: **Wed Sep 28, 2005 4:04 am**

Using 2006 Survey and Field it appears that the points
draw(Symbol,PNTNO,PTDESC,PNTELEV) have three nodes one at the point, one on
PNTNO and another on PNTDESC.
If I then draw a line with NODE set as OSNAP three points could be found. I
need to zoom in and ensure that I select the correct point.
Have I got a setting wrong.
Survcadd 2006 works fine.

Posted: **Wed Sep 28, 2005 5:16 am**

Chris McGinn wrote:

Using 2006 Survey and Field it appears that the points
draw(Symbol,PNTNO,PTDESC,PNTELEV) have three nodes one at the point, one on
PNTNO and another on PNTDESC.
If I then draw a line with NODE set as OSNAP three points could be found. I
need to zoom in and ensure that I select the correct point.
Have I got a setting wrong.
Survcadd 2006 works fine.

I believe this an autocad thing, or bug. It recognizes text or

attributes as a node, as well as the node at the block insert. I turn
off the node osnap and use the center of the circle as the snap point.

Posted: **Wed Sep 28, 2005 7:16 am**

Settings>Point Object Snap On/Off

"Chris McGinn" <chris.mcginn@braziermotti.com.au> wrote in message
news:dhcmmm$j69$1@update.carlsonsw.com...

Using 2006 Survey and Field it appears that the points
draw(Symbol,PNTNO,PTDESC,PNTELEV) have three nodes one at the point, one
on PNTNO and another on PNTDESC.
If I then draw a line with NODE set as OSNAP three points could be found.
I need to zoom in and ensure that I select the correct point.
Have I got a setting wrong.
Survcadd 2006 works fine.

Posted: **Wed Sep 28, 2005 5:45 pm**

I know what you mean.

I was used to LDD, where you can click anywhere on the point object and it
would snap to the actual point location - where you actually want the line
to be drawn to/from.

With Carlson, I usually draw the lines by point number - which is easier to
do than in LDD.

"Chris McGinn" <chris.mcginn@braziermotti.com.au> wrote in message
news:dhcmmm$j69$1@update.carlsonsw.com...

Using 2006 Survey and Field it appears that the points
draw(Symbol,PNTNO,PTDESC,PNTELEV) have three nodes one at the point, one
on
PNTNO and another on PNTDESC.
If I then draw a line with NODE set as OSNAP three points could be found.
I
need to zoom in and ensure that I select the correct point.
Have I got a setting wrong.
Survcadd 2006 works fine.

Posted: **Tue Oct 04, 2005 11:33 pm**

AutoCAD 2004 introduced this behavior for the node osnap. In AutoCAD
2006 they have added a variable (osnapnodelegacy) setting that will
prevent this behavior. In Survey i suggest turning off the node osnap
and turning on the Point Object Snap located under the Settings
pulldown. Hope this helps.

Chris McGinn wrote:

Using 2006 Survey and Field it appears that the points
draw(Symbol,PNTNO,PTDESC,PNTELEV) have three nodes one at the point, one on
PNTNO and another on PNTDESC.
If I then draw a line with NODE set as OSNAP three points could be found. I
need to zoom in and ensure that I select the correct point.
Have I got a setting wrong.
Survcadd 2006 works fine.

Carlson Software Forum

NODES CARLSON POINTS

NODES CARLSON POINTS

Re: NODES CARLSON POINTS

Re: NODES CARLSON POINTS

Re: NODES CARLSON POINTS

Re: NODES CARLSON POINTS