Page 1 of 1
description for radial stake out
Posted:
Sat Apr 25, 2009 3:21 amby trigpa
I'm doing a radial stake out but the description of what the point is does not print out. Any body have an idea what I'm doing wrong?
Thanks
Posted:
Sat Apr 25, 2009 12:47 pmby Nava Ran
It works for me:
----------------------------------------------------------------------------------------
Radial Stakeout Sat Apr 25 15:45:50 2009
Max Horiz Distance: 1000.0
File> C:\Carlson Projects\F2F\gederae.crd
Job Description>
Job Number> 0.000 Job Date> 11/02/2008
Occupied Point
1 129014.950 135495.400 73.820 WA1 OH-.3
Backsight Point
2 129020.840 135496.830 73.520 EP1
Backsight Azimuth=76°21'13" HzDist=6.061
Point No. Azimuth HzDist East(x) North(y) Elev(z) Desc
1 90°00'00" 0.000 129014.950 135495.400 73.820 WA1 OH-.3
1T 12°24'34" 46.906 129025.030 135541.210 72.310 ppo
2 76°21'13" 6.061 129020.840 135496.830 73.520 EP1
2T 66°34'31" 155.103 129157.270 135557.060 68.180 ppo
3 75°09'13" 7.376 129022.080 135497.290 73.520 SSM
3T 75°36'06" 331.616 129336.150 135577.860 70.250 ppo
4 79°32'08" 13.159 129027.890 135497.790 73.450 FOC1 oh.17
5 64°34'16" 20.750 129033.690 135504.310 73.540 WA2 OH.25
[/img]
radial stake out
Posted:
Sat Apr 25, 2009 3:27 pmby trigpa
Nava Ran-
I don't understand. Are you saying you have to manually type in your description in the draw-locate points menu?
Thanks for all of your replies. You should be paid. You always help people it seems like.
Thanks Tim
Posted:
Sat Apr 25, 2009 5:03 pmby Nava Ran
I use
COGO>Radial Stakeout
to prepare the report.
radial stake out
Posted:
Sun Apr 26, 2009 4:02 pmby trigpa
Nava Ran wrote:I use
COGO>Radial Stakeout
to prepare the report.
Yes Nava Ran-
That is what I'm saying that I have to manually type in my descriptions or when I print out the report there are no descriptions. So I must be doing something wrong. It seems to me that the description should be automatic. I know you are not here so you don't know how I'm doing it but maybe you have some idea what I'm doing wrong. Thanks
Tim
Posted:
Sun Apr 26, 2009 5:25 pmby Nava Ran
Use before printing
Points>CooRDinate File Utilities>Description for Points...
to assign descriptions for points you want to stake out
Posted:
Mon Apr 27, 2009 2:03 pmby trigpa
Nava Ran wrote:Use before printing
Points>CooRDinate File Utilities>Description for Points...
to assign descriptions for points you want to stake out
Thanks for your help Nava Ran
Posted:
Mon Apr 27, 2009 8:32 pmby dr
trigpa,
If you run the 'List Points' routine on this CRD do these points have descriptions? Search your system and delete the radstake.ini file to reset the routine.
Dr
Posted:
Tue Apr 28, 2009 5:58 pmby trigpa
dr wrote:trigpa,
If you run the 'List Points' routine on this CRD do these points have descriptions? Search your system and delete the radstake.ini file to reset the routine.
Dr
Thanks again dr
Tim