Connecting SurvCE 3.0 to R8 Receiver

Moderator: Carlson Support

Connecting SurvCE 3.0 to R8 Receiver

Postby Mike L » Tue Nov 19, 2013 6:05 pm

Has anyone connected a Trimble R8 receiver to a data collector with Surv CE using a MIFI device? We are currently using a Carlson Surveyor + with Surv CE 3.0 software. The wireless connection was successful, so I'd like to rule that out of the equation. When configuring the Bluetooth connection between the data collector and the R8, the d.c. recognizes the R8 and it seems to connect successfully (but no indicator). When I go to connect to CRTN, using NTRIP, the message reads "unable to configure device for RTK". The "device" in Carlson terminology means the Receiver (I'm 99% sure), and not the MIFI device. I'm thinking it's a Bluetooth issue right now, but I absolutely could be wrong.

If anyone has had similar issues or more insight into the situation, please help!

Thank you,
Mike LaFontaine
Mike L
 
Posts: 8
Joined: Tue Oct 08, 2013 1:35 pm
Location: Orange, CA

Return to Survey

Who is online

Users browsing this forum: No registered users