Carlson Software Forum

Posted: **Tue Feb 13, 2007 11:47 pm**

Anyone out there use Leica LGO data? Carlson has told me they are fixing
the Import tool that had a little glitch from a update on the Leica end.
I'm really wondering if the line work in LGO will come into Carlson.

##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##

Posted: **Wed Feb 14, 2007 6:15 pm**

Yes, we use LGO too, but have had the same problem with the Leica 1200
import on Carlson.

It's frustrating as the on-board export to RW5 on the instrument is slow and
also requires editing before Carlson can read it properly.

We have tried exporting in the instrument to various different formats and
then trying to import into Carlson, but the above seems to be the easiest
method so far.

Oliver

"Ray1" <raymondg@ayresassociates.com> wrote in message
news:eqt148$ke7$1@update.carlsonsw.com...

Anyone out there use Leica LGO data? Carlson has told me they are fixing
the Import tool that had a little glitch from a update on the Leica end.
I'm really wondering if the line work in LGO will come into Carlson.

##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##

Posted: **Tue Feb 27, 2007 7:32 pm**

I was told by one of our Leica 1200 Customers that in Carlson 2007 under
Survey / Data Collectors / Leica / "Leica 1200 Series" / "Import from
Leica" --- he was able to successfully import Leica 1200 data with this new
routine.

However, he tried using Survey / Edit_Process_Raw_Data / File / Import /
Leica = this routine did NOT work for him since it was expecting the older
files from everything but the Leica 1200.

We need to make sure and use the proper routine for working with Leica 1200
files under Survey / Data Collectors / Leica.

"Oliver Swaffield" <swaffield.gauntlett@logic.bm> wrote in message
news:eqv212$2gu$1@update.carlsonsw.com...

Yes, we use LGO too, but have had the same problem with the Leica 1200
import on Carlson.

It's frustrating as the on-board export to RW5 on the instrument is slow
and also requires editing before Carlson can read it properly.

We have tried exporting in the instrument to various different formats and
then trying to import into Carlson, but the above seems to be the easiest
method so far.

Oliver

"Ray1" <raymondg@ayresassociates.com> wrote in message
news:eqt148$ke7$1@update.carlsonsw.com...
Anyone out there use Leica LGO data? Carlson has told me they are fixing
the Import tool that had a little glitch from a update on the Leica end.
I'm really wondering if the line work in LGO will come into Carlson.

##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##

Posted: **Fri Mar 02, 2007 9:37 pm**

Hi John,

Which file type does the "Import from Leica" command look for? Is it the raw
data held in the DBX directory on the card? (ie with the .X?? extension).

Thanks,

Oliver
"John Gerber" <jgerber@carlsonsw.com> wrote in message
news:es1fdf$sef$1@update.carlsonsw.com...

I was told by one of our Leica 1200 Customers that in Carlson 2007 under
Survey / Data Collectors / Leica / "Leica 1200 Series" / "Import from
Leica" --- he was able to successfully import Leica 1200 data with this new
routine.

However, he tried using Survey / Edit_Process_Raw_Data / File / Import /
Leica = this routine did NOT work for him since it was expecting the older
files from everything but the Leica 1200.

We need to make sure and use the proper routine for working with Leica
1200 files under Survey / Data Collectors / Leica.

"Oliver Swaffield" <swaffield.gauntlett@logic.bm> wrote in message
news:eqv212$2gu$1@update.carlsonsw.com...
Yes, we use LGO too, but have had the same problem with the Leica 1200
import on Carlson.

It's frustrating as the on-board export to RW5 on the instrument is slow
and also requires editing before Carlson can read it properly.

We have tried exporting in the instrument to various different formats
and then trying to import into Carlson, but the above seems to be the
easiest method so far.

Oliver

"Ray1" <raymondg@ayresassociates.com> wrote in message
news:eqt148$ke7$1@update.carlsonsw.com...
Anyone out there use Leica LGO data? Carlson has told me they are fixing
the Import tool that had a little glitch from a update on the Leica end.
I'm really wondering if the line work in LGO will come into Carlson.

##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##

Posted: **Tue Apr 10, 2007 4:18 pm**

Has anybody had any success with this command at all?

I'm still not even sure what file type the command is looking for - the help
file is very vague.
I don't know whether it is looking for the raw data stored on the data card
or the raw data processed within LGO.
Either way I am still getting the same message: "error:unknown
code -1073741515".

At the moment the only way we can import the data from the Leica 1200 to
Carlson is to export as a text file and raw data file using the on-board
software which is very slow (approx 5mins for a thousand point file). It
would be nice just to import/export direct to the data card.

If anybody has any solutions or hints as to where I am going wrong, I would
be very grateful.

Thanks,

Oliver

"John Gerber" <jgerber@carlsonsw.com> wrote in message
news:es1fdf$sef$1@update.carlsonsw.com...

I was told by one of our Leica 1200 Customers that in Carlson 2007 under
Survey / Data Collectors / Leica / "Leica 1200 Series" / "Import from
Leica" --- he was able to successfully import Leica 1200 data with this new
routine.

However, he tried using Survey / Edit_Process_Raw_Data / File / Import /
Leica = this routine did NOT work for him since it was expecting the older
files from everything but the Leica 1200.

We need to make sure and use the proper routine for working with Leica
1200 files under Survey / Data Collectors / Leica.

"Oliver Swaffield" <swaffield.gauntlett@logic.bm> wrote in message
news:eqv212$2gu$1@update.carlsonsw.com...
Yes, we use LGO too, but have had the same problem with the Leica 1200
import on Carlson.

It's frustrating as the on-board export to RW5 on the instrument is slow
and also requires editing before Carlson can read it properly.

We have tried exporting in the instrument to various different formats
and then trying to import into Carlson, but the above seems to be the
easiest method so far.

Oliver

"Ray1" <raymondg@ayresassociates.com> wrote in message
news:eqt148$ke7$1@update.carlsonsw.com...
Anyone out there use Leica LGO data? Carlson has told me they are fixing
the Import tool that had a little glitch from a update on the Leica end.
I'm really wondering if the line work in LGO will come into Carlson.

##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##

Posted: **Tue Jul 17, 2007 3:08 am**

"error:unknown code -1073741515"

John Gerber wrote:

I was told by one of our Leica 1200 Customers that in Carlson 2007 under

Survey / Data Collectors / Leica / "Leica 1200 Series" /
"Import from
Leica" --- he was able to successfully import Leica 1200 data with
this new
routine.

However, he tried using Survey / Edit_Process_Raw_Data / File / Import /

Leica = this routine did NOT work for him since it was expecting the
older
files from everything but the Leica 1200.

We need to make sure and use the proper routine for working with Leica
1200
files under Survey / Data Collectors / Leica.

"Oliver Swaffield" <swaffield.gauntlett@logic.bm> wrote
in message
news:eqv212$2gu$1@update.carlsonsw.com...
Yes, we use LGO too, but have had the same problem with the Leica
1200
import on Carlson.

It's frustrating as the on-board export to RW5 on the instrument is
slow
and also requires editing before Carlson can read it properly.

We have tried exporting in the instrument to various different
formats and
then trying to import into Carlson, but the above seems to be the
easiest
method so far.

Oliver

"Ray1" <raymondg@ayresassociates.com> wrote in
message
news:eqt148$ke7$1@update.carlsonsw.com...
Anyone out there use Leica LGO data? Carlson has told me they
are fixing
the Import tool that had a little glitch from a update on the
Leica end.
I'm really wondering if the line work in LGO will come into
Carlson.

##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##

##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##

Carlson Software Forum

Leica1200 Import

Leica1200 Import

Re: Leica1200 Import

Re: Leica1200 Import

Re: Leica1200 Import

Re: Leica1200 Import

Re: Leica1200 Import