Removing ALL coordinates from .rw5 files

Moderator: Carlson Support

Removing ALL coordinates from .rw5 files

Postby MMFilus » Thu Oct 30, 2008 8:20 pm

Is there an automated way to remove all coordinates from a Carlson SurvCE .RW5 file?

I am planning on a rather large network of GPS and convetional data that I will be adjusting in SURVNET and was wondering if I will have to manually modify the files or if there is a batch process way to do this?

Thanks in advance,

Matt
MMFilus
 
Posts: 18
Joined: Mon Nov 19, 2007 1:51 pm
Location: Wisconsin

Coords in Raw File

Postby cujo » Fri Nov 28, 2008 9:22 pm

I am also very interested in this possability.

Newly starting to work with SurvNet I'm finding this a time-consuming task. In StarNet, any coordinate values in the .rw5 file are automatically set to "remark" and have no effect unless enabled.

I would think this would be a nice addition to the program. Today, practically all our work is eventually brought to grid, though our conventional work often starts based on local assumed coords.

Would a work-around be to set a CSE value of "float" at the beginning of the file? Will there still be a problem because "starting" values (Local) for the conventional work will be so vastly different than control values (Grid)?
Take care,

Rich
_________________________

Carlson Survey 2010 Standalone
Allegro CX SurvCE 2.5
Leica 1203 Robots
Leica DNA Level
Sokkia SDL Levels
cujo
 
Posts: 69
Joined: Thu Oct 23, 2008 2:01 am
Location: Southern California

remove store points

Postby GPSMAN » Thu May 07, 2009 11:42 am

not sure if this helps

you can change all the store point records in the rw5 file
to note fields.

in Carlson, Survey, Edit-process raw file...
EDIT, Convert Points to Note Records.
Jerry "Starman" Feldman
CADD/GIS/GPS/SURVEY TECH
GPSMAN
 
Posts: 78
Joined: Wed Jun 25, 2008 5:04 pm
Location: SPARKS, Maryland


Return to SurvNET

Who is online

Users browsing this forum: No registered users

cron