Locate and/or Zoom to a known coordinate point #

Moderator: Carlson Support

Locate and/or Zoom to a known coordinate point #

Postby gpsurveyor » Wed Oct 21, 2009 12:31 pm

Hello,
I'm inquiring on how to locate or zoom to a specific coordinate point number in the coodinate file, that is in the drawing. Yes, it is fairly easy if the drawing is small, and yes I have updated the drawing from the coordinate file, but in dealing with a large amount of points in a large drawing, I would really like to be able to get to the point in question promptly.

Thanks so much
gpsurveyor
 
Posts: 8
Joined: Wed Jun 04, 2008 4:34 pm

Postby site admin » Tue Oct 27, 2009 2:00 pm

Under the VIEW pull-down select "Zoom Point(s)"

you can select by point number or description.

If by Number, enter the point number and then use 50 for the magnification height.
site admin
Site Admin
 
Posts: 332
Joined: Wed Nov 21, 2007 4:40 pm
Location: Maysville KY


Return to Takeoff

Who is online

Users browsing this forum: No registered users