Page 1 of 1

Topsoil Respread Hatch - "No Hatch Created"

PostPosted: Wed Sep 04, 2013 5:21 pm
by bfriedel
I keep getting the prompt " No Hatch Created. Try larger hatch scale" when trying to hatch my topsoil replacement areas. i have tried changing the hatch scale, pattern, and toggling the automatic scale button. it does not happen every time. I have also tried clearing all of my removal lines and re-selecting and saving my work closing Carlson and re-opening. I am using TakeOff 2013 with the most recent update.

Re: Topsoil Respread Hatch - "No Hatch Created"

PostPosted: Fri Aug 10, 2018 6:13 pm
by Dent Cermak
"Larger Scale" ? They seem to be talking about Large Scale mapping, which has an opposite meaning. If your drawing is at 1"=30', try setting your hatch scale to 0.30, If that does not work, set the scale to 0.03. I think what you want will fall somewhere between those two values.

Also, make sure your UCS is set to "World".