Carlson Software Forum

Station + at Tick Mark labels the station text along the polyline with the '+'.
But it puts it the '+' slightly above the tick on the polyline and not directly on the tick...
I have attached the dialogue boxes to show what I am doing.





Anyones help is appreciated.

I have a sneaky feeling that it is a "font problem". The stationing may be coded to work with a "romans" text style. Various fonts can cause offsets because of differing internal insertion points. Try "romans" or the "text" or "standard" font and see what happens. Check the style default setting for your arial text style. You may be able to reset one of the settings to get it to line up better. Also, play with various text heights and see what effect this has on your problem.

Like Dent mentioned, fonts can make text alignment / positioning to a character in the string difficult. That said, I just tried in one of my projects with Arial font and the '+' is properly aligned with the tick. I was using slightly different settings for metric stationing and text size and using a centreline file instead of a polyline. I tested with my 2012 version on Intellicad 7.1.

Have you checked to verify it is actually the text in the wrong spot and not the tick?