create spot elev label error: "no surface data at point"

Moderator: Carlson Support

create spot elev label error: "no surface data at point"

Postby cburns0088 » Tue Aug 04, 2015 7:48 pm

Hi all,
I beleive this started after a Carlson update but cant be 100% as I didnt use this feature for some time after the update.

I cannot create a spot elevation on a surface. I get "no surface data at point" error everytime. If I go to 'Surface - Traingulation Surface Manager - Surface Manager' I can see the triangulation just fine and I confirm I am clicking with in the tin. But still I get "no surface data at point". I have tested this on a few diff projects to ensure its not the dwg or tin files.

Any Ideas?

thanks
cburns0088
 
Posts: 6
Joined: Mon Feb 23, 2015 2:14 pm
Location: 21093

Re: create spot elev label error: "no surface data at point"

Postby Gibbo » Mon Aug 10, 2015 1:44 am

Never experienced that problem. Using Intellicad? Version Carlson/Autocad?
Andy Gibson
Brisbane, Australia
Gibbo
 
Posts: 48
Joined: Thu Dec 29, 2011 9:42 am

Re: create spot elev label error: "no surface data at point"

Postby briangreen » Fri Jan 15, 2016 6:46 pm

Are you useing the command from the 3D Data pull down > Spot Elevations > Spot Elevation By Surface Model? If so, be sure under the "Source of Surface Model" you have "Surface FIle" selected. And your Placement Method is on "Pick Points". Lastely be certainly that you are selecting the correct tin when prompted.
briangreen
 
Posts: 1
Joined: Wed Jun 25, 2014 8:01 pm
Location: Dayton, Ohio


Return to Civil

Who is online

Users browsing this forum: No registered users

cron