Is it just me or does CLAYER no longer work for the Points Layer in the
Point Defaults dialog routine? Running XML (08/29/02) & Acad2002.
Point Defaults
Moderator: Carlson Support
5 posts
• Page 1 of 1
Re: Point Defaults
by Harley C. Pawley, PLS » Thu Sep 19, 2002 1:08 am
I guess I should explain the last: Setting the default to CLAYER now
creates a layer with that same name and puts my point nodes and symbols into
that layer. The Block reference attributes are going into the proper layer
as if the CLAYER setting is working correctly there.
Can anyone else duplicate this? Will a fix be required? By the way, I am
running Win98 w/ the setup given earlier.
"Harley C. Pawley, PLS" <hcp@coredesigninc.com> wrote in message
news:amao4v$cq0$1@update.carlsonsw.com...
creates a layer with that same name and puts my point nodes and symbols into
that layer. The Block reference attributes are going into the proper layer
as if the CLAYER setting is working correctly there.
Can anyone else duplicate this? Will a fix be required? By the way, I am
running Win98 w/ the setup given earlier.
"Harley C. Pawley, PLS" <hcp@coredesigninc.com> wrote in message
news:amao4v$cq0$1@update.carlsonsw.com...
Is it just me or does CLAYER no longer work for the Points Layer in the
Point Defaults dialog routine? Running XML (08/29/02) & Acad2002.
- Harley C. Pawley, PLS
Re: Point Defaults
by Dave C. » Thu Sep 19, 2002 5:15 pm
Harley,
I tried that as well, and got the same result. The routine created a layer
named "clayer", and the point information looks like this... ("DEED" was my
current layer)
Command: list
Select objects: 2 found, 1 group
Select objects:
BLOCK REFERENCE Layer: "DEED"
Space: Model space
Handle = 358A
Group = *A977
"SRVPNO2"
at point, X= 4681.5 Y= 5342.1 Z= 0.0
X scale factor 1.6
Y scale factor 1.6
rotation angle E
Z scale factor 1.6
ATTRIBUTE Layer: "PNTNO"
Space: Model space
Handle = 358B
Style = "PTXT"
Font file = TXT
start point, X= 4683.9 Y= 5343.3 Z= 0.0
height 1.6
value 78
tag PT#
rotation angle E
width scale factor 1.0
obliquing angle 0d0'0"
flags normal
generation normal
ATTRIBUTE Layer: "PNTELEV"
Space: Model space
Handle = 358C
Style = "PTXT"
Font file = TXT
Press ENTER to continue:
start point, X= 4683.9 Y= 5341.3 Z= 0.0
height 1.6
value
tag ELEV2
rotation angle E
width scale factor 1.0
obliquing angle 0d0'0"
flags normal
generation normal
ATTRIBUTE Layer: "PNTDESC"
Space: Model space
Handle = 358D
Style = "PTXT"
Font file = TXT
start point, X= 4683.9 Y= 5339.3 Z= 0.0
height 1.6
value
tag DESC2
rotation angle E
width scale factor 1.0
obliquing angle 0d0'0"
flags normal
generation normal
END SEQUENCE Layer: "DEED"
Space: Model space
Handle = 358E
POINT Layer: "CLAYER"
Space: Model space
Handle = 3589
Group = *A977
Press ENTER to continue:
at point, X= 4681.5 Y= 5342.1 Z= 0.0
"Harley C. Pawley, PLS" <hcp@coredesigninc.com> wrote in message
news:amapgm$d4k$1@update.carlsonsw.com...
I tried that as well, and got the same result. The routine created a layer
named "clayer", and the point information looks like this... ("DEED" was my
current layer)
Command: list
Select objects: 2 found, 1 group
Select objects:
BLOCK REFERENCE Layer: "DEED"
Space: Model space
Handle = 358A
Group = *A977
"SRVPNO2"
at point, X= 4681.5 Y= 5342.1 Z= 0.0
X scale factor 1.6
Y scale factor 1.6
rotation angle E
Z scale factor 1.6
ATTRIBUTE Layer: "PNTNO"
Space: Model space
Handle = 358B
Style = "PTXT"
Font file = TXT
start point, X= 4683.9 Y= 5343.3 Z= 0.0
height 1.6
value 78
tag PT#
rotation angle E
width scale factor 1.0
obliquing angle 0d0'0"
flags normal
generation normal
ATTRIBUTE Layer: "PNTELEV"
Space: Model space
Handle = 358C
Style = "PTXT"
Font file = TXT
Press ENTER to continue:
start point, X= 4683.9 Y= 5341.3 Z= 0.0
height 1.6
value
tag ELEV2
rotation angle E
width scale factor 1.0
obliquing angle 0d0'0"
flags normal
generation normal
ATTRIBUTE Layer: "PNTDESC"
Space: Model space
Handle = 358D
Style = "PTXT"
Font file = TXT
start point, X= 4683.9 Y= 5339.3 Z= 0.0
height 1.6
value
tag DESC2
rotation angle E
width scale factor 1.0
obliquing angle 0d0'0"
flags normal
generation normal
END SEQUENCE Layer: "DEED"
Space: Model space
Handle = 358E
POINT Layer: "CLAYER"
Space: Model space
Handle = 3589
Group = *A977
Press ENTER to continue:
at point, X= 4681.5 Y= 5342.1 Z= 0.0
"Harley C. Pawley, PLS" <hcp@coredesigninc.com> wrote in message
news:amapgm$d4k$1@update.carlsonsw.com...
I guess I should explain the last: Setting the default to CLAYER now
creates a layer with that same name and puts my point nodes and symbols
into
that layer. The Block reference attributes are going into the proper
layer
as if the CLAYER setting is working correctly there.
Can anyone else duplicate this? Will a fix be required? By the way, I am
running Win98 w/ the setup given earlier.
"Harley C. Pawley, PLS" <hcp@coredesigninc.com> wrote in message
news:amao4v$cq0$1@update.carlsonsw.com...
Is it just me or does CLAYER no longer work for the Points Layer in the
Point Defaults dialog routine? Running XML (08/29/02) & Acad2002.
- Dave C.
Re: Point Defaults
by Harley C. Pawley, PLS » Thu Sep 19, 2002 9:11 pm
I have found a more specific problem. When I draw a range of points in the
Locate Points routine, it seperates the point symbol and node into the
CLAYER layer. But, if I pick a point on screen to create, it places those
items in the proper current layer.
Can I get a response from Carlson on this, and a fix?
"Dave C." <dcc@geosurv.com> wrote in message
news:amci7s$ngo$1@update.carlsonsw.com...
Locate Points routine, it seperates the point symbol and node into the
CLAYER layer. But, if I pick a point on screen to create, it places those
items in the proper current layer.
Can I get a response from Carlson on this, and a fix?
"Dave C." <dcc@geosurv.com> wrote in message
news:amci7s$ngo$1@update.carlsonsw.com...
Harley,
I tried that as well, and got the same result. The routine created a
layer
named "clayer", and the point information looks like this... ("DEED" was
my
current layer)
Command: list
Select objects: 2 found, 1 group
Select objects:
BLOCK REFERENCE Layer: "DEED"
Space: Model space
Handle = 358A
Group = *A977
"SRVPNO2"
at point, X= 4681.5 Y= 5342.1 Z= 0.0
X scale factor 1.6
Y scale factor 1.6
rotation angle E
Z scale factor 1.6
ATTRIBUTE Layer: "PNTNO"
Space: Model space
Handle = 358B
Style = "PTXT"
Font file = TXT
start point, X= 4683.9 Y= 5343.3 Z= 0.0
height 1.6
value 78
tag PT#
rotation angle E
width scale factor 1.0
obliquing angle 0d0'0"
flags normal
generation normal
ATTRIBUTE Layer: "PNTELEV"
Space: Model space
Handle = 358C
Style = "PTXT"
Font file = TXT
Press ENTER to continue:
start point, X= 4683.9 Y= 5341.3 Z= 0.0
height 1.6
value
tag ELEV2
rotation angle E
width scale factor 1.0
obliquing angle 0d0'0"
flags normal
generation normal
ATTRIBUTE Layer: "PNTDESC"
Space: Model space
Handle = 358D
Style = "PTXT"
Font file = TXT
start point, X= 4683.9 Y= 5339.3 Z= 0.0
height 1.6
value
tag DESC2
rotation angle E
width scale factor 1.0
obliquing angle 0d0'0"
flags normal
generation normal
END SEQUENCE Layer: "DEED"
Space: Model space
Handle = 358E
POINT Layer: "CLAYER"
Space: Model space
Handle = 3589
Group = *A977
Press ENTER to continue:
at point, X= 4681.5 Y= 5342.1 Z= 0.0
"Harley C. Pawley, PLS" <hcp@coredesigninc.com> wrote in message
news:amapgm$d4k$1@update.carlsonsw.com...
I guess I should explain the last: Setting the default to CLAYER now
creates a layer with that same name and puts my point nodes and symbols
into
that layer. The Block reference attributes are going into the proper
layer
as if the CLAYER setting is working correctly there.
Can anyone else duplicate this? Will a fix be required? By the way, I
am
running Win98 w/ the setup given earlier.
"Harley C. Pawley, PLS" <hcp@coredesigninc.com> wrote in message
news:amao4v$cq0$1@update.carlsonsw.com...
Is it just me or does CLAYER no longer work for the Points Layer in
the
Point Defaults dialog routine? Running XML (08/29/02) & Acad2002.
- Harley C. Pawley, PLS
Re: Point Defaults
by Barkley Hensley, P.L.S. » Thu Sep 19, 2002 11:46 pm
Harley,
As per our conversation and verification, this problem has been documented
and relayed to the programmers. Stay tuned for updates on our website.
Thanks for the report.
Barkley Hensley, P.L.S.
Tech Support Manager
Carlson Software
email - bhensley@carlsonsw.com
"Harley C. Pawley, PLS" <hcp@coredesigninc.com> wrote in message
news:amd00b$rf6$1@update.carlsonsw.com...
As per our conversation and verification, this problem has been documented
and relayed to the programmers. Stay tuned for updates on our website.
Thanks for the report.
Barkley Hensley, P.L.S.
Tech Support Manager
Carlson Software
email - bhensley@carlsonsw.com
"Harley C. Pawley, PLS" <hcp@coredesigninc.com> wrote in message
news:amd00b$rf6$1@update.carlsonsw.com...
I have found a more specific problem. When I draw a range of points in
the
Locate Points routine, it seperates the point symbol and node into the
CLAYER layer. But, if I pick a point on screen to create, it places those
items in the proper current layer.
Can I get a response from Carlson on this, and a fix?
"Dave C." <dcc@geosurv.com> wrote in message
news:amci7s$ngo$1@update.carlsonsw.com...
Harley,
I tried that as well, and got the same result. The routine created a
layer
named "clayer", and the point information looks like this... ("DEED" was
my
current layer)
Command: list
Select objects: 2 found, 1 group
Select objects:
BLOCK REFERENCE Layer: "DEED"
Space: Model space
Handle = 358A
Group = *A977
"SRVPNO2"
at point, X= 4681.5 Y= 5342.1 Z= 0.0
X scale factor 1.6
Y scale factor 1.6
rotation angle E
Z scale factor 1.6
ATTRIBUTE Layer: "PNTNO"
Space: Model space
Handle = 358B
Style = "PTXT"
Font file = TXT
start point, X= 4683.9 Y= 5343.3 Z= 0.0
height 1.6
value 78
tag PT#
rotation angle E
width scale factor 1.0
obliquing angle 0d0'0"
flags normal
generation normal
ATTRIBUTE Layer: "PNTELEV"
Space: Model space
Handle = 358C
Style = "PTXT"
Font file = TXT
Press ENTER to continue:
start point, X= 4683.9 Y= 5341.3 Z= 0.0
height 1.6
value
tag ELEV2
rotation angle E
width scale factor 1.0
obliquing angle 0d0'0"
flags normal
generation normal
ATTRIBUTE Layer: "PNTDESC"
Space: Model space
Handle = 358D
Style = "PTXT"
Font file = TXT
start point, X= 4683.9 Y= 5339.3 Z= 0.0
height 1.6
value
tag DESC2
rotation angle E
width scale factor 1.0
obliquing angle 0d0'0"
flags normal
generation normal
END SEQUENCE Layer: "DEED"
Space: Model space
Handle = 358E
POINT Layer: "CLAYER"
Space: Model space
Handle = 3589
Group = *A977
Press ENTER to continue:
at point, X= 4681.5 Y= 5342.1 Z= 0.0
"Harley C. Pawley, PLS" <hcp@coredesigninc.com> wrote in message
news:amapgm$d4k$1@update.carlsonsw.com...
I guess I should explain the last: Setting the default to CLAYER now
creates a layer with that same name and puts my point nodes and
symbols
into
that layer. The Block reference attributes are going into the proper
layer
as if the CLAYER setting is working correctly there.
Can anyone else duplicate this? Will a fix be required? By the way, I
am
running Win98 w/ the setup given earlier.
"Harley C. Pawley, PLS" <hcp@coredesigninc.com> wrote in message
news:amao4v$cq0$1@update.carlsonsw.com...
Is it just me or does CLAYER no longer work for the Points Layer in
the
Point Defaults dialog routine? Running XML (08/29/02) & Acad2002.
- Barkley Hensley, P.L.S.
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: Majestic-12 [Bot]