Simple reverse curve yields error....

[emorse4487]

Carlson Civil Suite w/ IntelliCAD
Build 090806

Command:SRCR
[end on] Select ARC at PC Start point of the curve:
ARC not selected.
quit / exit abort :error#74
Command:

It tells me that the object I am selecting is not an Arc... but it is. Sometimes it works, sometimes it doesn't.

Is there any other way to draw reverse curves?

-Eric

[site admin]

it seems to be hanging up when the arc you select is part of a polyline. It works as expected when selecting an arc. I will copy programming on this and see if there is a fix available. Thanks for the report.

bharris
Technical Support
Carlson Software