F2F reduction

[ColC]

I have narrowed down a problem I have with 2010 F2F. When I run F2F with a code setting for USE RAW DESCRIPTION as Attribute Block and ATTRIBUTE FORMAT set to both, during the reduction process it invokes the last command (a multiple number of times) used prior to running F2F. If the last command is of minor impact such as regen then it doesn't cause a big problem. But if F2F is the first operation when opening a job it runs OPEN, this can result in a very long processing of the F2F. Delete is also a command which causes some problem. There are combination of the URD & AF settings which do not cause the problem.

I have reported this to support, but suggest if one has a similar problem, they run REGEN just prior to F2F or change the settings to combination which avoids the issue.