AutoCAD 14
SC2000 CES
Any symbol created with SurvCAD in paper space will not insert.
Geoff
Moderator: Carlson Support
AutoCAD 14
SC2000 CES
Any symbol created with SurvCAD in paper space will not insert.
Geoff
Nope. I am referring to "tools>Edit Symbol Library". I create a
block from something located in paper space and store it in the symbol
library. Then I use "Tools>Insert Symbols" to insert it into paper
space and the object does not get inserted. However if I create the
same symbol in model space and then insert it in paper space, it
works. Basically what I am saying is that any symbol created in paper
space will not insert in either model nor paper space.
Geoff
"Jason" <jbly@marshandlegge.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010EA5@WEBSERVER...
| You must be talking about Tools>Insert Symbols command
| Are you sure it's not being inserted at a bigger scale factor? Zoom
extents
| to make sure.
|
| If you are inserting into PS, then the horizontal scale should be
set to 1
| or you could adjust the symbol size.
|
| Jason
|
| "Geoffrey Leiter, P.E." <darc87@hotmail.com> wrote in message
| news:B4A0F73FCE8FD411AF8B00207811DE59010EA1@WEBSERVER...
| > AutoCAD 14
| > SC2000 CES
|
| > Any symbol created with SurvCAD in paper space will not insert.
|
| > Geoff
|
|
Nope. I am referring to "tools>Edit Symbol Library". I create a
block from something located in paper space and store it in the
symbol
library. Then I use "Tools>Insert Symbols" to insert it into paper
space and the object does not get inserted. However if I create the
same symbol in model space and then insert it in paper space, it
works. Basically what I am saying is that any symbol created in
paper
space will not insert in either model nor paper space.
Geoff
"Jason" <jbly@marshandlegge.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010EA5@WEBSERVER...
| You must be talking about Tools>Insert Symbols command
| Are you sure it's not being inserted at a bigger scale factor?
Zoom
extents
| to make sure.
|
| If you are inserting into PS, then the horizontal scale should be
set to 1
| or you could adjust the symbol size.
|
| Jason
|
| "Geoffrey Leiter, P.E." <darc87@hotmail.com> wrote in message
| news:B4A0F73FCE8FD411AF8B00207811DE59010EA1@WEBSERVER...
| > AutoCAD 14
| > SC2000 CES
|
| > Any symbol created with SurvCAD in paper space will not insert.
|
| > Geoff
|
|
Nope. I am referring to "tools>Edit Symbol Library". I create a
block from something located in paper space and store it in the
symbol
library. Then I use "Tools>Insert Symbols" to insert it into paper
space and the object does not get inserted. However if I create the
same symbol in model space and then insert it in paper space, it
works. Basically what I am saying is that any symbol created in
paper
space will not insert in either model nor paper space.
Geoff
"Jason" <jbly@marshandlegge.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010EA5@WEBSERVER...
| You must be talking about Tools>Insert Symbols command
| Are you sure it's not being inserted at a bigger scale factor?
Zoom
extents
| to make sure.
|
| If you are inserting into PS, then the horizontal scale should be
set to 1
| or you could adjust the symbol size.
|
| Jason
|
| "Geoffrey Leiter, P.E." <darc87@hotmail.com> wrote in message
| news:B4A0F73FCE8FD411AF8B00207811DE59010EA1@WEBSERVER...
| > AutoCAD 14
| > SC2000 CES
|
| > Any symbol created with SurvCAD in paper space will not insert.
|
| > Geoff
|
|
Ok just watched your movie..very cool. I am using AutoCAD r14 with
SCAD CES. You are doing exactly what I mentioned, however it doesn't
work in R14.
I forget that you run R14. I will try it using R14 tomorrow and let
you know.
Ok just watched your movie..very cool. I am using AutoCAD r14 with
SCAD CES. You are doing exactly what I mentioned, however it
doesn't
work in R14.
Users browsing this forum: No registered users