Carlson Software Forum

This worked fine in CES but no longer works in XML:

We code linework with a period then descriptor. For example edge of
pavement is coded as .EP+7 .EP .EP .EP-7 and .EP+7 .EP PC .EP .EP PT .EP-7
for curves.

XML is not recognizing my "." descriptors anymore. When I do a code table
report it says code does not exist even though I have ".EP" set up.

Geoff

Geoffrey,

I have comfirmed this and I am waiting to hear something back from the programmers. I'll let you know as soon as I know something. Thanks

-----------------
Randall McSwain
Carlson Software


"Geoffrey Leiter" <darc87@hotmail.com> wrote in message news:ai9ikj$b0g$1@update.carlsonsw.com...

This worked fine in CES but no longer works in XML:

We code linework with a period then descriptor. For example edge of
pavement is coded as .EP+7 .EP .EP .EP-7 and .EP+7 .EP PC .EP .EP PT ..EP-7
for curves.

XML is not recognizing my "." descriptors anymore. When I do a code table
report it says code does not exist even though I have ".EP" set up.

Geoff

Anything new on this? Is this something that can easily be fixed with a
patch?

Geoff

"R.K. McSwain" <notachance@thisdomain.org> wrote in message
news:aibkfd$rv3$1@update.carlsonsw.com...
Geoffrey,

I have comfirmed this and I am waiting to hear something back from the
programmers. I'll let you know as soon as I know something. Thanks

-----------------
Randall McSwain
Carlson Software


"Geoffrey Leiter" <darc87@hotmail.com> wrote in message
news:ai9ikj$b0g$1@update.carlsonsw.com...

This worked fine in CES but no longer works in XML:

We code linework with a period then descriptor. For example edge of
pavement is coded as .EP+7 .EP .EP .EP-7 and .EP+7 .EP PC .EP .EP PT .EP-7
for curves.

XML is not recognizing my "." descriptors anymore. When I do a code table
report it says code does not exist even though I have ".EP" set up.

Geoff

In the meantime you can use "L" instead "." or nothing or change in a text
editor "." with "" or with "L"
Harry Ran
"Geoffrey Leiter" <darc87@hotmail.com>
news:ai9ikj$b0g$1@update.carlsonsw.com...

This worked fine in CES but no longer works in XML:

We code linework with a period then descriptor. For example edge of
pavement is coded as .EP+7 .EP .EP .EP-7 and .EP+7 .EP PC .EP .EP PT .EP-7
for curves.

XML is not recognizing my "." descriptors anymore. When I do a code table
report it says code does not exist even though I have ".EP" set up.

Geoff

Fix emailed to Geoffrey. This will also be included in the next build of SurvCADD.

> Anything new on this?

Thanks for sending the update so quickly. Still some problems.

It seems that F2F is not recognizing the attribute Layout ID, I am using an
ALID with an elevation set at 30 degree rotation. If I manually insert a
point using Draw Locate Points it is drawn correctly but when using F2F the
selected ALID is not used.

Geoff


"R.K. McSwain" <notachance@thisdomain.org> wrote in message
news:aimp4c$1qk$1@update.carlsonsw.com...
Fix emailed to Geoffrey. This will also be included in the next build of
SurvCADD.

> Anything new on this?

I believe what happened was that you received a finish.dll from our
work-in-progress database rather than from our XML database. I've sent you
the correct finish.dll. I've also fixed the problem in our XML2 database;
thank you for alerting us to it!

--
Ron Little
Software Engineer, Carlson Software
San Francisco, CA
650-728-8464
"Geoffrey Leiter" <darc87@hotmail.com> wrote in message
news:aip48c$jf6$1@update.carlsonsw.com...

Thanks for sending the update so quickly. Still some problems.

It seems that F2F is not recognizing the attribute Layout ID, I am using
an
ALID with an elevation set at 30 degree rotation. If I manually insert a
point using Draw Locate Points it is drawn correctly but when using F2F
the
selected ALID is not used.

Geoff


"R.K. McSwain" <notachance@thisdomain.org> wrote in message
news:aimp4c$1qk$1@update.carlsonsw.com...
Fix emailed to Geoffrey. This will also be included in the next build of
SurvCADD.

Anything new on this?