Carlson Software Forum

Posted: **Tue Mar 09, 2004 10:59 pm**

is there any way to have survcadd label the depth difference between 2 profiles
like it labels the station/elevation?

--
Dave C. Johnson
djohnson@wwcengineering.com
WWC Engineering
Sheridan WY.
Windows 2k2
Acad Map 2004
Survcadd XML2

Posted: **Thu Mar 11, 2004 6:53 pm**

"dcjohnson" <djohnsonout@outwwcengineering.com> wrote in message
news:c2l0in$r12$1@update.carlsonsw.com...

is there any way to have survcadd label the depth difference between 2
profiles
like it labels the station/elevation?

--
Dave C. Johnson
djohnson@wwcengineering.com
WWC Engineering
Sheridan WY.
Windows 2k2
Acad Map 2004
Survcadd XML2

The "Horizontal Axis Elevations" routine has "Elevation Difference Options"
at the bottom of the dialog.

Terry Scanlon

Posted: **Thu Mar 11, 2004 8:52 pm**

I think I need to to some more picking on commands to see what they do. thanks
that is what I was looking for.

--
Dave C. Johnson
djohnson AT wwcengineering DOT com
WWC Engineering
Sheridan WY.
Windows 2k
Acad Map 2004
Survcadd XML2

Posted: **Mon Mar 15, 2004 4:24 pm**

Terry,

Is it possible to write an elevation difference between 2 .PRO files to
another .PRO?

Regards...Stephen Rhodes

"Terry Scanlon" <tpsx@dbfinc.com> wrote in message
news:c2pqvi$p4l$1@update.carlsonsw.com...

"dcjohnson" <djohnsonout@outwwcengineering.com> wrote in message
news:c2l0in$r12$1@update.carlsonsw.com...
is there any way to have survcadd label the depth difference between 2
profiles
like it labels the station/elevation?

--
Dave C. Johnson
djohnson@wwcengineering.com
WWC Engineering
Sheridan WY.
Windows 2k2
Acad Map 2004
Survcadd XML2

The "Horizontal Axis Elevations" routine has "Elevation Difference
Options"
at the bottom of the dialog.

Terry Scanlon

Posted: **Mon Mar 15, 2004 7:08 pm**

"Stephen Rhodes" <stephen.rhodes@fyfe.com.au> wrote in message
news:c342nr$lf9$1@update.carlsonsw.com...

Terry,

Is it possible to write an elevation difference between 2 .PRO files to
another .PRO?

Regards...Stephen Rhodes

I could not find a routine to do so.

Terry

Posted: **Wed Mar 17, 2004 1:03 am**

Stephen,

If you open a profile file with Notepad you will see that it is a simple
comma delimited ASCII file. You can open both profiles with a spreadsheet,
do the subtraction and write the results back out to a comma delimited ASCII
file using the same format. Change the file extension to ".pro" and you
have your profile file containing the differentials.

Dan Capps

"Stephen Rhodes" <stephen.rhodes@fyfe.com.au> wrote in message
news:c342nr$lf9$1@update.carlsonsw.com...

Terry,

Is it possible to write an elevation difference between 2 .PRO files to
another .PRO?

Regards...Stephen Rhodes

"Terry Scanlon" <tpsx@dbfinc.com> wrote in message
news:c2pqvi$p4l$1@update.carlsonsw.com...
"dcjohnson" <djohnsonout@outwwcengineering.com> wrote in message
news:c2l0in$r12$1@update.carlsonsw.com...
is there any way to have survcadd label the depth difference between 2
profiles
like it labels the station/elevation?

--
Dave C. Johnson
djohnson@wwcengineering.com
WWC Engineering
Sheridan WY.
Windows 2k2
Acad Map 2004
Survcadd XML2

The "Horizontal Axis Elevations" routine has "Elevation Difference
Options"
at the bottom of the dialog.

Terry Scanlon

Posted: **Sat Mar 20, 2004 2:46 pm**

Thanks Daniel,
I will have to try this in Excel - but I think the 2 files have slightly
different station values.
(I'm sure that one file has more entries than the other)
Regards...Stephen

"Daniel Capps" <danc@mccullers-capps.com> wrote in message
news:c37mio$avf$1@update.carlsonsw.com...

Stephen,

If you open a profile file with Notepad you will see that it is a simple
comma delimited ASCII file. You can open both profiles with a
spreadsheet,
do the subtraction and write the results back out to a comma delimited
ASCII
file using the same format. Change the file extension to ".pro" and you
have your profile file containing the differentials.

Dan Capps

"Stephen Rhodes" <stephen.rhodes@fyfe.com.au> wrote in message
news:c342nr$lf9$1@update.carlsonsw.com...
Terry,

Is it possible to write an elevation difference between 2 .PRO files to
another .PRO?

Regards...Stephen Rhodes

"Terry Scanlon" <tpsx@dbfinc.com> wrote in message
news:c2pqvi$p4l$1@update.carlsonsw.com...
"dcjohnson" <djohnsonout@outwwcengineering.com> wrote in message
news:c2l0in$r12$1@update.carlsonsw.com...
is there any way to have survcadd label the depth difference between
2
profiles
like it labels the station/elevation?

--
Dave C. Johnson
djohnson@wwcengineering.com
WWC Engineering
Sheridan WY.
Windows 2k2
Acad Map 2004
Survcadd XML2

The "Horizontal Axis Elevations" routine has "Elevation Difference
Options"
at the bottom of the dialog.

Terry Scanlon

Carlson Software Forum

profile elevation difference

profile elevation difference

Re: profile elevation difference

Re: profile elevation difference

Re: profile elevation difference

Re: profile elevation difference

Re: profile elevation difference

Re: profile elevation difference