Field and Finish Setup

Moderator: Carlson Support

Field and Finish Setup

Postby Guest » Fri Jun 11, 2004 1:22 am

Hello,

Is there any good advice on how to setting the Field and Finish in SurvCADD?
I spent the whole day trying to figure how to turn TRC # into ' #" Crype
Myrtle Tree ' and make the symbol scale accordingly. I'm exhausted. And
the lineworks, our company use the "connecting points w/ the same code"
method in the Help File, I checked Nearest Found option, but it came out
just bad, too many lines overlap each other. Please help!!!!!!!!!!!!!!!!!!!
SOS!!!!!!!!!!!!
Guest
 

Re: Field and Finish Setup

Postby Guest » Fri Jun 11, 2004 1:36 am

um ... by the way, I am using SurvCADD XML Release 2 for AutoCAD LDD 2i.

<nhuynguyen_REMOVE@sbcglobal.net> wrote in message
news:caaje6$eub$1@update.carlsonsw.com...
Hello,

Is there any good advice on how to setting the Field and Finish in
SurvCADD?
I spent the whole day trying to figure how to turn TRC # into ' #" Crype
Myrtle Tree ' and make the symbol scale accordingly. I'm exhausted. And
the lineworks, our company use the "connecting points w/ the same code"
method in the Help File, I checked Nearest Found option, but it came out
just bad, too many lines overlap each other. Please
help!!!!!!!!!!!!!!!!!!!
SOS!!!!!!!!!!!!

Guest
 

Re: Field and Finish Setup

Postby Nava Ran » Fri Jun 11, 2004 9:56 am

You should find quite a bit of satisfaction as well as a good understanding
of the software by starting with the tutorials and working your
way through them.
You're welcome to contact me directly.

<nhuynguyen_REMOVE@sbcglobal.net> wrote in message
news:caaje6$eub$1@update.carlsonsw.com...
Hello,

Is there any good advice on how to setting the Field and Finish in
SurvCADD?
I spent the whole day trying to figure how to turn TRC # into ' #" Crype
Myrtle Tree ' and make the symbol scale accordingly. I'm exhausted. And
the lineworks, our company use the "connecting points w/ the same code"
method in the Help File, I checked Nearest Found option, but it came out
just bad, too many lines overlap each other. Please
help!!!!!!!!!!!!!!!!!!!
SOS!!!!!!!!!!!!

Nava Ran
 

Re: Field and Finish Setup

Postby Guest » Fri Jun 11, 2004 5:08 pm

Um ... I look through the tutorial, but there's no tips on coding Field and
Finish though, even the survcadd.fld listing all the sizes of tree as codes
(example 10D as 10" Tree all thru 50D as 50" Tree). I know my code can be
described in DescKey of LDD is $1" $2 TREE, is there anyway to do that in
SurvCADD??? or should I just give up and manually enter all possible sizes
of tree in there? Problem is our code is TRO space 30, so SurvCADD only
read TRO as code, my point gonna comes in as Orchard Tree 30 as description.


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:cabe1v$npd$1@update.carlsonsw.com...
You should find quite a bit of satisfaction as well as a good
understanding
of the software by starting with the tutorials and working your
way through them.
You're welcome to contact me directly.

nhuynguyen_REMOVE@sbcglobal.net> wrote in message
news:caaje6$eub$1@update.carlsonsw.com...
Hello,

Is there any good advice on how to setting the Field and Finish in
SurvCADD?
I spent the whole day trying to figure how to turn TRC # into ' #" Crype
Myrtle Tree ' and make the symbol scale accordingly. I'm exhausted.
And
the lineworks, our company use the "connecting points w/ the same code"
method in the Help File, I checked Nearest Found option, but it came out
just bad, too many lines overlap each other. Please
help!!!!!!!!!!!!!!!!!!!
SOS!!!!!!!!!!!!



Guest
 

Re: Field and Finish Setup

Postby R.K. McSwain » Fri Jun 11, 2004 5:21 pm

<nhuynguyen@sbcglobal.net> wrote...
Um ... I look through the tutorial, but there's no tips on coding Field and
Finish

I would suggest taking advantage of the free technical support. Call Carlson and they will help you out. 800-989-5028
R.K. McSwain
 

Re: Field and Finish Setup

Postby Nava Ran » Fri Jun 11, 2004 9:09 pm

Use SZ:
7 130026.00 160028.00 39.51 TREE SZ2
8 130051.00 160052.00 39.58 TREE SZ3
<nhuynguyen@sbcglobal.net> wrote in message
news:cacarp$27l$1@update.carlsonsw.com...
Um ... I look through the tutorial, but there's no tips on coding Field
and
Finish though, even the survcadd.fld listing all the sizes of tree as
codes
(example 10D as 10" Tree all thru 50D as 50" Tree). I know my code can be
described in DescKey of LDD is $1" $2 TREE, is there anyway to do that in
SurvCADD??? or should I just give up and manually enter all possible
sizes
of tree in there? Problem is our code is TRO space 30, so SurvCADD only
read TRO as code, my point gonna comes in as Orchard Tree 30 as
description.


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:cabe1v$npd$1@update.carlsonsw.com...
You should find quite a bit of satisfaction as well as a good
understanding
of the software by starting with the tutorials and working your
way through them.
You're welcome to contact me directly.

nhuynguyen_REMOVE@sbcglobal.net> wrote in message
news:caaje6$eub$1@update.carlsonsw.com...
Hello,

Is there any good advice on how to setting the Field and Finish in
SurvCADD?
I spent the whole day trying to figure how to turn TRC # into ' #"
Crype
Myrtle Tree ' and make the symbol scale accordingly. I'm exhausted.
And
the lineworks, our company use the "connecting points w/ the same
code"
method in the Help File, I checked Nearest Found option, but it came
out
just bad, too many lines overlap each other. Please
help!!!!!!!!!!!!!!!!!!!
SOS!!!!!!!!!!!!





Nava Ran
 

Re: Field and Finish Setup

Postby Guest » Fri Jun 11, 2004 9:11 pm

i wouldn't want to go in crd file and alter the code though, not good
practice if I have 20000 points or so. i guess I have to call Carlson like
McSwain suggest. But I can't believe I'm the only one having this problem,
guess not many people using Field and Finish huh?


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:caclek$831$1@update.carlsonsw.com...
Use SZ:
7 130026.00 160028.00 39.51 TREE SZ2
8 130051.00 160052.00 39.58 TREE SZ3
nhuynguyen@sbcglobal.net> wrote in message
news:cacarp$27l$1@update.carlsonsw.com...
Um ... I look through the tutorial, but there's no tips on coding Field
and
Finish though, even the survcadd.fld listing all the sizes of tree as
codes
(example 10D as 10" Tree all thru 50D as 50" Tree). I know my code can
be
described in DescKey of LDD is $1" $2 TREE, is there anyway to do that
in
SurvCADD??? or should I just give up and manually enter all possible
sizes
of tree in there? Problem is our code is TRO space 30, so SurvCADD only
read TRO as code, my point gonna comes in as Orchard Tree 30 as
description.


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:cabe1v$npd$1@update.carlsonsw.com...
You should find quite a bit of satisfaction as well as a good
understanding
of the software by starting with the tutorials and working your
way through them.
You're welcome to contact me directly.

nhuynguyen_REMOVE@sbcglobal.net> wrote in message
news:caaje6$eub$1@update.carlsonsw.com...
Hello,

Is there any good advice on how to setting the Field and Finish in
SurvCADD?
I spent the whole day trying to figure how to turn TRC # into ' #"
Crype
Myrtle Tree ' and make the symbol scale accordingly. I'm exhausted.
And
the lineworks, our company use the "connecting points w/ the same
code"
method in the Help File, I checked Nearest Found option, but it came
out
just bad, too many lines overlap each other. Please
help!!!!!!!!!!!!!!!!!!!
SOS!!!!!!!!!!!!







Guest
 

Re: Field and Finish Setup

Postby Terry Scanlon » Sat Jun 12, 2004 1:23 am

I use Field to Finish all the time. The thing is, it's been set up for a
long time, so I don't recall the details of setting it up. I guess that's
the beauty of F2F... once you've done the setup chore...you done't have to
worry about it again.

For connecting points with the same code: what is the code you are creating
linework for? If I am running a treeline, "nearest found" works pretty
good...or "sequential". If it is work produced from cross sections
(tb,cld,tb or ep,cl,ep) "nearest" or "sequential" will be garbage. In the
cross section case, a Sequence code needs to be created (check box at top of
Edit Code dialog) ...look into the F2F help on sequences...there's a couple
of options for that one too depending how your crew works.

To get the most out of F2F, one may have to make some alterations in one's
field codes. For an existing file with 20000 points, it may be helpful to
use the Search and Replace in the Point Editor.

Terry Scanlon



<nhuynguyen@sbcglobal.net> wrote in message
news:cacp37$9t9$1@update.carlsonsw.com...
i wouldn't want to go in crd file and alter the code though, not good
practice if I have 20000 points or so. i guess I have to call Carlson like
McSwain suggest. But I can't believe I'm the only one having this
problem,
guess not many people using Field and Finish huh?


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:caclek$831$1@update.carlsonsw.com...
Use SZ:
7 130026.00 160028.00 39.51 TREE SZ2
8 130051.00 160052.00 39.58 TREE SZ3
nhuynguyen@sbcglobal.net> wrote in message
news:cacarp$27l$1@update.carlsonsw.com...
Um ... I look through the tutorial, but there's no tips on coding
Field
and
Finish though, even the survcadd.fld listing all the sizes of tree as
codes
(example 10D as 10" Tree all thru 50D as 50" Tree). I know my code
can
be
described in DescKey of LDD is $1" $2 TREE, is there anyway to do that
in
SurvCADD??? or should I just give up and manually enter all possible
sizes
of tree in there? Problem is our code is TRO space 30, so SurvCADD
only
read TRO as code, my point gonna comes in as Orchard Tree 30 as
description.


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:cabe1v$npd$1@update.carlsonsw.com...
You should find quite a bit of satisfaction as well as a good
understanding
of the software by starting with the tutorials and working your
way through them.
You're welcome to contact me directly.

nhuynguyen_REMOVE@sbcglobal.net> wrote in message
news:caaje6$eub$1@update.carlsonsw.com...
Hello,

Is there any good advice on how to setting the Field and Finish in
SurvCADD?
I spent the whole day trying to figure how to turn TRC # into ' #"
Crype
Myrtle Tree ' and make the symbol scale accordingly. I'm
exhausted.
And
the lineworks, our company use the "connecting points w/ the same
code"
method in the Help File, I checked Nearest Found option, but it
came
out
just bad, too many lines overlap each other. Please
help!!!!!!!!!!!!!!!!!!!
SOS!!!!!!!!!!!!









Terry Scanlon
 

Re: Field and Finish Setup

Postby Jason Bly » Sat Jun 12, 2004 5:20 am

The one problem with what you said is that "one may have to make some
alterations in one's field codes". The software gives (or it at least it
should give) the user the chance to customize the routine, however, I have
had trouble getting it to do what I want as well. We spent a lot of time
trying to get things to appear correct, but finally gave up even after
contacting Carlson multiple times. I don't recall exactly what was
happening, but I do remember it involved trees and their respective sizes.
We did try the SZ, however, I think we had trouble with the description
attribute having the correct size notations/

For the most part we figured out F2F, but the trees and its descriptions
seemed to stump me. I also recall coming to the conclusion that we needed to
process the F2F twice using two different coding libraries. One would be to
insert the symbols and linework on their appropriate layers and then again
to put each point & attributes on its layer. We preferred not to have the
map symbol be the point symbol.

Jason Bly

"Terry Scanlon" <tpsx@dbfinc.com> wrote in message
news:cad7rn$gkr$1@update.carlsonsw.com...
I use Field to Finish all the time. The thing is, it's been set up for a
long time, so I don't recall the details of setting it up. I guess that's
the beauty of F2F... once you've done the setup chore...you done't have to
worry about it again.

For connecting points with the same code: what is the code you are
creating
linework for? If I am running a treeline, "nearest found" works pretty
good...or "sequential". If it is work produced from cross sections
(tb,cld,tb or ep,cl,ep) "nearest" or "sequential" will be garbage. In the
cross section case, a Sequence code needs to be created (check box at top
of
Edit Code dialog) ...look into the F2F help on sequences...there's a
couple
of options for that one too depending how your crew works.

To get the most out of F2F, one may have to make some alterations in one's
field codes. For an existing file with 20000 points, it may be helpful to
use the Search and Replace in the Point Editor.

Terry Scanlon



nhuynguyen@sbcglobal.net> wrote in message
news:cacp37$9t9$1@update.carlsonsw.com...
i wouldn't want to go in crd file and alter the code though, not good
practice if I have 20000 points or so. i guess I have to call Carlson
like
McSwain suggest. But I can't believe I'm the only one having this
problem,
guess not many people using Field and Finish huh?


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:caclek$831$1@update.carlsonsw.com...
Use SZ:
7 130026.00 160028.00 39.51 TREE SZ2
8 130051.00 160052.00 39.58 TREE SZ3
nhuynguyen@sbcglobal.net> wrote in message
news:cacarp$27l$1@update.carlsonsw.com...
Um ... I look through the tutorial, but there's no tips on coding
Field
and
Finish though, even the survcadd.fld listing all the sizes of tree
as
codes
(example 10D as 10" Tree all thru 50D as 50" Tree). I know my code
can
be
described in DescKey of LDD is $1" $2 TREE, is there anyway to do
that
in
SurvCADD??? or should I just give up and manually enter all
possible
sizes
of tree in there? Problem is our code is TRO space 30, so SurvCADD
only
read TRO as code, my point gonna comes in as Orchard Tree 30 as
description.


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:cabe1v$npd$1@update.carlsonsw.com...
You should find quite a bit of satisfaction as well as a good
understanding
of the software by starting with the tutorials and working your
way through them.
You're welcome to contact me directly.

nhuynguyen_REMOVE@sbcglobal.net> wrote in message
news:caaje6$eub$1@update.carlsonsw.com...
Hello,

Is there any good advice on how to setting the Field and Finish
in
SurvCADD?
I spent the whole day trying to figure how to turn TRC # into '
#"
Crype
Myrtle Tree ' and make the symbol scale accordingly. I'm
exhausted.
And
the lineworks, our company use the "connecting points w/ the
same
code"
method in the Help File, I checked Nearest Found option, but it
came
out
just bad, too many lines overlap each other. Please
help!!!!!!!!!!!!!!!!!!!
SOS!!!!!!!!!!!!











Jason Bly
 

Re: Field and Finish Setup

Postby Guest » Mon Jun 14, 2004 11:23 pm

Hello all again, hope you guys had a good weekend. I have question about
Sequences. So I set up code RD as a sequence for SD1 EP1 CL EP2 SHD2 (like
in Help File), so do I go in the crd file and insert that RD code everytime
that sequence appears?? do I erase the actual SD1 EP1 CL EP2 SHD2 in the crd
file?? How do I do it?

"Terry Scanlon" <tpsx@dbfinc.com> wrote in message
news:cad7rn$gkr$1@update.carlsonsw.com...
I use Field to Finish all the time. The thing is, it's been set up for a
long time, so I don't recall the details of setting it up. I guess that's
the beauty of F2F... once you've done the setup chore...you done't have to
worry about it again.

For connecting points with the same code: what is the code you are
creating
linework for? If I am running a treeline, "nearest found" works pretty
good...or "sequential". If it is work produced from cross sections
(tb,cld,tb or ep,cl,ep) "nearest" or "sequential" will be garbage. In the
cross section case, a Sequence code needs to be created (check box at top
of
Edit Code dialog) ...look into the F2F help on sequences...there's a
couple
of options for that one too depending how your crew works.

To get the most out of F2F, one may have to make some alterations in one's
field codes. For an existing file with 20000 points, it may be helpful to
use the Search and Replace in the Point Editor.

Terry Scanlon



nhuynguyen@sbcglobal.net> wrote in message
news:cacp37$9t9$1@update.carlsonsw.com...
i wouldn't want to go in crd file and alter the code though, not good
practice if I have 20000 points or so. i guess I have to call Carlson
like
McSwain suggest. But I can't believe I'm the only one having this
problem,
guess not many people using Field and Finish huh?


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:caclek$831$1@update.carlsonsw.com...
Use SZ:
7 130026.00 160028.00 39.51 TREE SZ2
8 130051.00 160052.00 39.58 TREE SZ3
nhuynguyen@sbcglobal.net> wrote in message
news:cacarp$27l$1@update.carlsonsw.com...
Um ... I look through the tutorial, but there's no tips on coding
Field
and
Finish though, even the survcadd.fld listing all the sizes of tree
as
codes
(example 10D as 10" Tree all thru 50D as 50" Tree). I know my code
can
be
described in DescKey of LDD is $1" $2 TREE, is there anyway to do
that
in
SurvCADD??? or should I just give up and manually enter all
possible
sizes
of tree in there? Problem is our code is TRO space 30, so SurvCADD
only
read TRO as code, my point gonna comes in as Orchard Tree 30 as
description.


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:cabe1v$npd$1@update.carlsonsw.com...
You should find quite a bit of satisfaction as well as a good
understanding
of the software by starting with the tutorials and working your
way through them.
You're welcome to contact me directly.

nhuynguyen_REMOVE@sbcglobal.net> wrote in message
news:caaje6$eub$1@update.carlsonsw.com...
Hello,

Is there any good advice on how to setting the Field and Finish
in
SurvCADD?
I spent the whole day trying to figure how to turn TRC # into '
#"
Crype
Myrtle Tree ' and make the symbol scale accordingly. I'm
exhausted.
And
the lineworks, our company use the "connecting points w/ the
same
code"
method in the Help File, I checked Nearest Found option, but it
came
out
just bad, too many lines overlap each other. Please
help!!!!!!!!!!!!!!!!!!!
SOS!!!!!!!!!!!!











Guest
 

Re: Field and Finish Setup

Postby Nava Ran » Tue Jun 15, 2004 9:47 am

In CRD file the description has to be RD for the points in sequence.
In FLD file define SD, EP, CL, EP, SHD
<nhuynguyen@sbcglobal.net> wrote in message
news:caktua$eb4$1@update.carlsonsw.com...
Hello all again, hope you guys had a good weekend. I have question about
Sequences. So I set up code RD as a sequence for SD1 EP1 CL EP2 SHD2 (like
in Help File), so do I go in the crd file and insert that RD code
everytime
that sequence appears?? do I erase the actual SD1 EP1 CL EP2 SHD2 in the
crd
file?? How do I do it?

"Terry Scanlon" <tpsx@dbfinc.com> wrote in message
news:cad7rn$gkr$1@update.carlsonsw.com...
I use Field to Finish all the time. The thing is, it's been set up for
a
long time, so I don't recall the details of setting it up. I guess
that's
the beauty of F2F... once you've done the setup chore...you done't have
to
worry about it again.

For connecting points with the same code: what is the code you are
creating
linework for? If I am running a treeline, "nearest found" works pretty
good...or "sequential". If it is work produced from cross sections
(tb,cld,tb or ep,cl,ep) "nearest" or "sequential" will be garbage. In
the
cross section case, a Sequence code needs to be created (check box at
top
of
Edit Code dialog) ...look into the F2F help on sequences...there's a
couple
of options for that one too depending how your crew works.

To get the most out of F2F, one may have to make some alterations in
one's
field codes. For an existing file with 20000 points, it may be helpful
to
use the Search and Replace in the Point Editor.

Terry Scanlon



nhuynguyen@sbcglobal.net> wrote in message
news:cacp37$9t9$1@update.carlsonsw.com...
i wouldn't want to go in crd file and alter the code though, not good
practice if I have 20000 points or so. i guess I have to call Carlson
like
McSwain suggest. But I can't believe I'm the only one having this
problem,
guess not many people using Field and Finish huh?


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:caclek$831$1@update.carlsonsw.com...
Use SZ:
7 130026.00 160028.00 39.51 TREE SZ2
8 130051.00 160052.00 39.58 TREE SZ3
nhuynguyen@sbcglobal.net> wrote in message
news:cacarp$27l$1@update.carlsonsw.com...
Um ... I look through the tutorial, but there's no tips on coding
Field
and
Finish though, even the survcadd.fld listing all the sizes of tree
as
codes
(example 10D as 10" Tree all thru 50D as 50" Tree). I know my
code
can
be
described in DescKey of LDD is $1" $2 TREE, is there anyway to do
that
in
SurvCADD??? or should I just give up and manually enter all
possible
sizes
of tree in there? Problem is our code is TRO space 30, so
SurvCADD
only
read TRO as code, my point gonna comes in as Orchard Tree 30 as
description.


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:cabe1v$npd$1@update.carlsonsw.com...
You should find quite a bit of satisfaction as well as a good
understanding
of the software by starting with the tutorials and working your
way through them.
You're welcome to contact me directly.

nhuynguyen_REMOVE@sbcglobal.net> wrote in message
news:caaje6$eub$1@update.carlsonsw.com...
Hello,

Is there any good advice on how to setting the Field and
Finish
in
SurvCADD?
I spent the whole day trying to figure how to turn TRC # into
'
#"
Crype
Myrtle Tree ' and make the symbol scale accordingly. I'm
exhausted.
And
the lineworks, our company use the "connecting points w/ the
same
code"
method in the Help File, I checked Nearest Found option, but
it
came
out
just bad, too many lines overlap each other. Please
help!!!!!!!!!!!!!!!!!!!
SOS!!!!!!!!!!!!













Nava Ran
 

Re: Field and Finish Setup

Postby NNguyen » Thu Jun 17, 2004 8:04 am

As always, thank you Nava :-) But I give up for now, I brought the files to
our IT guy and asked him to figure it for me ^.^ I'm so lazy....

"Nava Ran" <navaran@zahav.net.il> wrote in message
news:calv1c$rgm$1@update.carlsonsw.com...
In CRD file the description has to be RD for the points in sequence.
In FLD file define SD, EP, CL, EP, SHD
nhuynguyen@sbcglobal.net> wrote in message
news:caktua$eb4$1@update.carlsonsw.com...
Hello all again, hope you guys had a good weekend. I have question
about
Sequences. So I set up code RD as a sequence for SD1 EP1 CL EP2 SHD2
(like
in Help File), so do I go in the crd file and insert that RD code
everytime
that sequence appears?? do I erase the actual SD1 EP1 CL EP2 SHD2 in the
crd
file?? How do I do it?

"Terry Scanlon" <tpsx@dbfinc.com> wrote in message
news:cad7rn$gkr$1@update.carlsonsw.com...
I use Field to Finish all the time. The thing is, it's been set up
for
a
long time, so I don't recall the details of setting it up. I guess
that's
the beauty of F2F... once you've done the setup chore...you done't
have
to
worry about it again.

For connecting points with the same code: what is the code you are
creating
linework for? If I am running a treeline, "nearest found" works
pretty
good...or "sequential". If it is work produced from cross sections
(tb,cld,tb or ep,cl,ep) "nearest" or "sequential" will be garbage. In
the
cross section case, a Sequence code needs to be created (check box at
top
of
Edit Code dialog) ...look into the F2F help on sequences...there's a
couple
of options for that one too depending how your crew works.

To get the most out of F2F, one may have to make some alterations in
one's
field codes. For an existing file with 20000 points, it may be
helpful
to
use the Search and Replace in the Point Editor.

Terry Scanlon



nhuynguyen@sbcglobal.net> wrote in message
news:cacp37$9t9$1@update.carlsonsw.com...
i wouldn't want to go in crd file and alter the code though, not
good
practice if I have 20000 points or so. i guess I have to call
Carlson
like
McSwain suggest. But I can't believe I'm the only one having this
problem,
guess not many people using Field and Finish huh?


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:caclek$831$1@update.carlsonsw.com...
Use SZ:
7 130026.00 160028.00 39.51 TREE SZ2
8 130051.00 160052.00 39.58 TREE SZ3
nhuynguyen@sbcglobal.net> wrote in message
news:cacarp$27l$1@update.carlsonsw.com...
Um ... I look through the tutorial, but there's no tips on
coding
Field
and
Finish though, even the survcadd.fld listing all the sizes of
tree
as
codes
(example 10D as 10" Tree all thru 50D as 50" Tree). I know my
code
can
be
described in DescKey of LDD is $1" $2 TREE, is there anyway to
do
that
in
SurvCADD??? or should I just give up and manually enter all
possible
sizes
of tree in there? Problem is our code is TRO space 30, so
SurvCADD
only
read TRO as code, my point gonna comes in as Orchard Tree 30 as
description.


"Nava Ran" <navaran@zahav.net.il> wrote in message
news:cabe1v$npd$1@update.carlsonsw.com...
You should find quite a bit of satisfaction as well as a good
understanding
of the software by starting with the tutorials and working
your
way through them.
You're welcome to contact me directly.

nhuynguyen_REMOVE@sbcglobal.net> wrote in message
news:caaje6$eub$1@update.carlsonsw.com...
Hello,

Is there any good advice on how to setting the Field and
Finish
in
SurvCADD?
I spent the whole day trying to figure how to turn TRC #
into
'
#"
Crype
Myrtle Tree ' and make the symbol scale accordingly. I'm
exhausted.
And
the lineworks, our company use the "connecting points w/ the
same
code"
method in the Help File, I checked Nearest Found option, but
it
came
out
just bad, too many lines overlap each other. Please
help!!!!!!!!!!!!!!!!!!!
SOS!!!!!!!!!!!!















NNguyen
 

Re: Field and Finish Setup

Postby R.K. McSwain » Thu Jun 17, 2004 5:06 pm

"NNguyen" <nhuynguyen_NOSPAM@sbcglobal.net> wrote...
But I give up for now, I brought the files to
our IT guy and asked him to figure it for me ^.^ I'm so lazy....

IT guy? What will he be able to do? You have to know a little about how the data is collected and what the final output should look like.
R.K. McSwain
 

Re: Field and Finish Setup

Postby NNguyen » Fri Aug 20, 2004 7:30 am

ah ... he's an IT and a drafter too, so he might be figure it out faster
than me. :) but so far ... nothing yet hehe.

"R.K. McSwain" <rkmcswain@yahoo.com> wrote in message
news:cas4t3$mjf$1@update.carlsonsw.com...
"NNguyen" <nhuynguyen_NOSPAM@sbcglobal.net> wrote...
But I give up for now, I brought the files to
our IT guy and asked him to figure it for me ^.^ I'm so lazy....

IT guy? What will he be able to do? You have to know a little about how the
data is collected and what the final output should look like.
NNguyen
 


Return to Survey

Who is online

Users browsing this forum: No registered users