Carlson Software Forum

Posted: **Tue Aug 16, 2005 7:39 pm**

Using Survcad 2006 build 050721
When a Pacsoft file is converted, the Northings and Eastings are reversed.
Also the descriptions are not coming across correctly, some come across,
some not, there are "$" and squares scattered in the descriptions throughout
the file.

This feature was working in XML2 (April 7th, 2005 fix) Is it possible to get
someone to look at this file "COGOUTIL.ARX"? I have that April 7th version
of that file in an E-Mail, I could copy and replace, but am not sure if
other utilities have been enhanced or fixed since April.
I would be more than willing to send example Pacsoft data files again, what
ever it takes as I have 18 years worth of Pacsoft data that needs converted.

Thanks, Jeremy

Posted: **Wed Aug 24, 2005 12:41 am**

Jeremy,

I have forwarded your post to our programming department. Thanks.

Lon Watson

"Surveyor" <surveyor@isp.com> wrote in message
news:ddt1bd$bn9$1@update.carlsonsw.com...

Using Survcad 2006 build 050721
When a Pacsoft file is converted, the Northings and Eastings are reversed.
Also the descriptions are not coming across correctly, some come across,
some not, there are "$" and squares scattered in the descriptions
throughout the file.

This feature was working in XML2 (April 7th, 2005 fix) Is it possible to
get someone to look at this file "COGOUTIL.ARX"? I have that April 7th
version of that file in an E-Mail, I could copy and replace, but am not
sure if other utilities have been enhanced or fixed since April.
I would be more than willing to send example Pacsoft data files again,
what ever it takes as I have 18 years worth of Pacsoft data that needs
converted.

Thanks, Jeremy

Posted: **Thu Aug 25, 2005 12:42 am**

Jeremy,

Can you please send an example Pacsoft file to me at lwatson@carlsonsw.com?
Thanks.

Sincerely,
Lon

"Surveyor" <surveyor@isp.com> wrote in message
news:ddt1bd$bn9$1@update.carlsonsw.com...

Using Survcad 2006 build 050721
When a Pacsoft file is converted, the Northings and Eastings are reversed.
Also the descriptions are not coming across correctly, some come across,
some not, there are "$" and squares scattered in the descriptions
throughout the file.

This feature was working in XML2 (April 7th, 2005 fix) Is it possible to
get someone to look at this file "COGOUTIL.ARX"? I have that April 7th
version of that file in an E-Mail, I could copy and replace, but am not
sure if other utilities have been enhanced or fixed since April.
I would be more than willing to send example Pacsoft data files again,
what ever it takes as I have 18 years worth of Pacsoft data that needs
converted.

Thanks, Jeremy

Posted: **Thu Aug 25, 2005 8:02 pm**

yes. later today.
"Lon Watson" <lwatson@carlsonsw.com> wrote in message
news:deim3i$l1u$1@update.carlsonsw.com...

Jeremy,

Can you please send an example Pacsoft file to me at
lwatson@carlsonsw.com? Thanks.

Sincerely,
Lon

"Surveyor" <surveyor@isp.com> wrote in message
news:ddt1bd$bn9$1@update.carlsonsw.com...
Using Survcad 2006 build 050721
When a Pacsoft file is converted, the Northings and Eastings are
reversed. Also the descriptions are not coming across correctly, some
come across, some not, there are "$" and squares scattered in the
descriptions throughout the file.

This feature was working in XML2 (April 7th, 2005 fix) Is it possible to
get someone to look at this file "COGOUTIL.ARX"? I have that April 7th
version of that file in an E-Mail, I could copy and replace, but am not
sure if other utilities have been enhanced or fixed since April.
I would be more than willing to send example Pacsoft data files again,
what ever it takes as I have 18 years worth of Pacsoft data that needs
converted.

Thanks, Jeremy

Posted: **Tue Aug 30, 2005 7:34 pm**

Dave, thanks for the fix. Things are working great! Jeremy

"Surveyor" <surveyor@isp.com> wrote in message
news:ddt1bd$bn9$1@update.carlsonsw.com...

Using Survcad 2006 build 050721
When a Pacsoft file is converted, the Northings and Eastings are reversed.
Also the descriptions are not coming across correctly, some come across,
some not, there are "$" and squares scattered in the descriptions
throughout the file.

This feature was working in XML2 (April 7th, 2005 fix) Is it possible to
get someone to look at this file "COGOUTIL.ARX"? I have that April 7th
version of that file in an E-Mail, I could copy and replace, but am not
sure if other utilities have been enhanced or fixed since April.
I would be more than willing to send example Pacsoft data files again,
what ever it takes as I have 18 years worth of Pacsoft data that needs
converted.

Thanks, Jeremy

Carlson Software Forum

Convert Point Format http://update3.carlsonsw.com/forum/viewtopic.php?f=5&t=1827

Convert Point Format
http://update3.carlsonsw.com/forum/viewtopic.php?f=5&t=1827