Slow Inverse Command

[Jason]

I just upgraded to AutoCAD 2006 with SurvCadd 2006 from 2002/XML. The
inverse command now seems to have a significant lag. The system pauses for
about 2 seconds after each click. It only seems to happen when picking
points off the screen. If I enter point numbers its fine. Has anyone else
experienced this problem? I'm running a P4/3.4, 1G ram, 128MB ATI video
card.

Any help would be greatly appreciated.

Thanks

Jason

[Don Reichle]

Hey Jason;

Did your upgrade to 2K6 include the recent service pack? If you acquired 2K6
awhile back, then you probably want to see where you can get the SP I would
imagine:
http://tinyurl.com/pgof

That "might" help the issue you reported also.

--
Don Reichle
"King Of Work-Arounds"
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
--------------------------------------
LDT-2K4
AMD64 3200+
XPPro 32bit SP2
1GB RAM
Nvidia GeForce FX 5200 128MB
Western Digital Raptor 10K-rpm HD


"Jason" <jasonedwards@optonline.com> wrote in message
news:di0kuc$cf0$1@update.carlsonsw.com...

I just upgraded to AutoCAD 2006 with SurvCadd 2006 from 2002/XML. The
inverse command now seems to have a significant lag. The system pauses
for
about 2 seconds after each click. It only seems to happen when picking
points off the screen. If I enter point numbers its fine. Has anyone else
experienced this problem? I'm running a P4/3.4, 1G ram, 128MB ATI video
card.

Any help would be greatly appreciated.

Thanks

Jason

[Jason]

Hey Don,

Thanks for the response. I have installed all the SPs'. I've been doing
some experimenting and it seems that it has something to do with crd file
being on a network share. If I move the crd to my local drive the problem
disapears. A network problem I guess. Its strange to me that this problem
did not exist in previous releases. What has changed?

Any further suggestions would be great

Thanks

Jason

"Don Reichle" <spamless-reichle4@hotmail.com> wrote in message
news:di14at$oev$1@update.carlsonsw.com...

Hey Jason;

Did your upgrade to 2K6 include the recent service pack? If you acquired
2K6 awhile back, then you probably want to see where you can get the SP I
would imagine:
http://tinyurl.com/pgof

That "might" help the issue you reported also.

--
Don Reichle
"King Of Work-Arounds"
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
--------------------------------------
LDT-2K4
AMD64 3200+
XPPro 32bit SP2
1GB RAM
Nvidia GeForce FX 5200 128MB
Western Digital Raptor 10K-rpm HD


"Jason" <jasonedwards@optonline.com> wrote in message
news:di0kuc$cf0$1@update.carlsonsw.com...
I just upgraded to AutoCAD 2006 with SurvCadd 2006 from 2002/XML. The
inverse command now seems to have a significant lag. The system pauses
for
about 2 seconds after each click. It only seems to happen when picking
points off the screen. If I enter point numbers its fine. Has anyone else
experienced this problem? I'm running a P4/3.4, 1G ram, 128MB ATI video
card.

Any help would be greatly appreciated.

Thanks

Jason

[Don Reichle]

snip>What has changed?
Well, how about the addition of the CUI, for one?

Anything else would be dependent on the SurvCADD would be my guess, so we'll
just have to wait for an expert now.

I just wanted to make sure you had all of the necessary pieces of the SP
involved. And according to your own self, you do.

Hang in there - waiting is no fun.

--
Don Reichle
"King Of Work-Arounds"
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
--------------------------------------
LDT-2K4
AMD64 3200+
XPPro 32bit SP2
1GB RAM
Nvidia GeForce FX 5200 128MB
Western Digital Raptor 10K-rpm HD


"Jason" <jasonedwards@optonline.com> wrote in message
news:di160q$plq$1@update.carlsonsw.com...

Hey Don,

Thanks for the response. I have installed all the SPs'. I've been doing
some experimenting and it seems that it has something to do with crd file
being on a network share. If I move the crd to my local drive the problem
disapears. A network problem I guess. Its strange to me that this problem
did not exist in previous releases. What has changed?

Any further suggestions would be great

Thanks

Jason

"Don Reichle" <spamless-reichle4@hotmail.com> wrote in message
news:di14at$oev$1@update.carlsonsw.com...
Hey Jason;

Did your upgrade to 2K6 include the recent service pack? If you acquired
2K6 awhile back, then you probably want to see where you can get the SP I
would imagine:
http://tinyurl.com/pgof

That "might" help the issue you reported also.

--
Don Reichle
"King Of Work-Arounds"
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
--------------------------------------
LDT-2K4
AMD64 3200+
XPPro 32bit SP2
1GB RAM
Nvidia GeForce FX 5200 128MB
Western Digital Raptor 10K-rpm HD


"Jason" <jasonedwards@optonline.com> wrote in message
news:di0kuc$cf0$1@update.carlsonsw.com...
I just upgraded to AutoCAD 2006 with SurvCadd 2006 from 2002/XML. The
inverse command now seems to have a significant lag. The system pauses
for
about 2 seconds after each click. It only seems to happen when picking
points off the screen. If I enter point numbers its fine. Has anyone
else
experienced this problem? I'm running a P4/3.4, 1G ram, 128MB ATI video
card.

Any help would be greatly appreciated.

Thanks

Jason