Line by direction

[Wnettles]

Is there any way to draw a line by distsnce and direction (bearing or
azimuth) in Survey 2008?


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survcadd
##-----------------------------------------------##

[Ran]

COGO>Line by Angle-Distance

"Wnettles" <wnettles@edgsc.com> wrote in message
news:ffcos9$lf6$1@update.carlsonsw.com...

Is there any way to draw a line by distsnce and direction (bearing or
azimuth) in Survey 2008?


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survcadd
##-----------------------------------------------##

[Ran]

Edit>Extend>By Distance

"Wnettles" <wnettles@edgsc.com> wrote in message
news:ffcos9$lf6$1@update.carlsonsw.com...

Is there any way to draw a line by distsnce and direction (bearing or
azimuth) in Survey 2008?


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survcadd
##-----------------------------------------------##

[Rod1973]

Try using the locate by line-distance under the COGO menu, there are a few options to start by its real easy once you have set these parameters, also make sure your units are set to the correct settings eg. metres and degrees min sec for surveyors.

[jmshaw]

You can also use Enter Deed Description which is useful if you want to draw a line or a series of lines but you are not interested in actually placing real points on the line. Just pay attention to your options if you attempt this method.