Page 1 of 1
Spot Elev by Surface Model does not work.
Posted:
Thu Aug 11, 2016 7:20 pm
by J Davis
I just installed 2017 Carlson Survey on top of Autocad 2017. The "spot elev by surface model" no longer works. Did Carlson do away with it?
Re: Spot Elev by Surface Model does not work.
Posted:
Fri Aug 12, 2016 6:37 am
by Nava Ran
Carlson Civil>3D Data>Set Point Elevations>By Surface Model
Re: Spot Elev by Surface Model does not work.
Posted:
Fri Aug 12, 2016 4:34 pm
by J Davis
We never had civil. It was in survey.
Re: Spot Elev by Surface Model does not work.
Posted:
Sat Aug 13, 2016 5:56 am
by Nava Ran
Carlson Survey>Surface>Spot Elevations>Draw Spot Elevation
User Reference>Single Surface File
It works.
Re: Spot Elev by Surface Model does not work.
Posted:
Mon Aug 15, 2016 5:20 pm
by J Davis
We don't have civil....
In Carlson Survey -
It was Surface-Spot Elevations-Spot Elevations by Surface Model. Then I could pick the option of using surface entities (contour lines) without a tin.
It was working in 2016.
Re: Spot Elev by Surface Model does not work.
Posted:
Mon Aug 15, 2016 10:04 pm
by cfm
I had the same problem last week and it took a while to get it working.
SURFACE/SPOT ELEVATION/DRAW SPOT ELEVATION/ then the trick is to select, from the dialogue box, USE REFERENCE and set to SINGLE SURFACE FILE