Collector Connector (CC01)
Collector Connector does not appear on "Sight" Survey's Add-Ins menu
Collector Connector is located on the Add-Ins pull-down menu inside of "Sight" Survey. The Add-Ins menu is located between the Utilities and Window pull-down menus. If you canít find the Add-Ins menu, you should first be sure that you are running the "Sight" Survey Professional version 2 or 3, and that your "Sight" Survey serial number is 970812 or greater. You can find both these items shown on the bottom of the System Information screen within "Sight" Survey. Enter the routine code SI to access this screen.
If you do not have the Professional version, or if your serial number is less than 970812, you may wish to call our sales office at 1-(606) 564-5028 to purchase a "Sight" Survey upgrade. Pricing will vary depending upon the version of "Sight" Survey that you currently own. If you do not wish to purchase the upgrade, you can still use Collector Connector as a stand-alone program; however, you will not be able to use it seamlessly integrated within your "Sight" Survey program.
If you do have the Professional version, and your serial number is 970812 or greater, then Collector Connector should appear on the Add-Ins menu; however, it may appear grayed-out or dimmed. If you are unable to access Collector Connector because the selection is dimmed, then the Path To CollConn setting on the File Paths tab of the "Sight" Survey Configuration Menu is not properly set. Select Config > File Path Configuration or enter the routine code CM, followed by a P to access this screen. Change the Path To CollConn setting to the name of the folder where Collector Connector is installed. The default name that the installation program uses for this directory is:
where Drive is replaced by the drive letter where the program is installed. If you installed the program to a different folder, you must select that folder instead.
© 2008 by Carlson Software, Inc. Last modified November 18, 2008