Collector Connector  (CC30)

 

SDR Doesn’t Transfer

 

 

If your SDR data collector will not transfer the file either to or from the PC, most likely the cause of the problem is the setting of the adapter switch on the communications cable.  The switch needs to be set towards the DTE position.  (If the switch is set toward the DCE position, no communications will occur.)  Flip the switch and re-attempt the transfer.

 

 

►  SimSystems Home           ►  Collector Connector FAQ Index

 

© 2008 by Carlson Software, Inc.   Last modified November 18, 2008