Contour It (CI02)
Contour It does not appear on the “Sight” Survey Add-Ins menu
Contour It! is located on the Add-Ins pull-down menu inside of “Sight” Survey. The actual menu item is Make Contour Lines (MC).
The Add-Ins menu is located between the Utilities and Windows pull-down menus. If you can’t find the Add-Ins menu, you should first be sure that you are running the “Sight” Survey Professional version, and that your “Sight” Survey serial number is 970812 or greater. You can find both these items shown on the bottom of the System Information screen within “Sight” Survey. Enter the routine code SI to access this screen.
If you do not have the Professional version, or if your serial number is less than 970812, you may wish to call our sales office at (606) 564-5028 to purchase a “Sight” Survey upgrade. Pricing will vary depending upon the version of “Sight” Survey that you currently own. If you do not wish to purchase the upgrade, you can still use Contour It! as a stand-alone program however, you will not be able to use it seamlessly integrated within your “Sight” Survey program.
If you do have the Professional version, and your serial number is 970812 or greater, then Make Contour Lines (MC) should appear on the Add-Ins menu, however, it may appear grayed-out or dimmed. If you are unable to access Contour It! because the selection is dimmed, then Contour It! was installed to the wrong directory. Contour It! must be located in the same directory as your “Sight” Survey Professional program. The default name that the installation program uses for this directory is:
where Drive is replaced by the drive letter where the program is installed.
© 2008 by Carlson Software, Inc. Last modified November 18, 2008