|
Collector Connector (CC32)
Port Already In Use
This message will appear if you have set the COM Port on the Configure tab to a port that is currently in use by another device or software program.
Serial Port COM1 is in use by another program!
Either close the program that may be using the port, or change the COM port setting on the Configuration Screen.
You will either need to close the other program that is using the serial port, or you will need to select a different serial port for Collector Connector to use. If you were using a DOS program that used the serial port, but is no longer using that port, you will need to exit the DOS program. If that program was running under a DOS SHELL session, you may even need to close the DOS SHELL window for the port to be freed up.
© 2008 by Carlson Software, Inc. Last modified November 18, 2008
|